updates

git-svn-id: file:///srv/dev-disk-by-uuid-17e88007-4d0c-45e0-8757-cacfcc458630/repositories/svn/Diplomarbeit@138 9fe90eed-be63-e94b-8204-d34ff4c2ff93

Test_Item/SW/script/cf_test

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+
+# Hint: "ori" = ORIginal; "rb" = ReadBack; "res" = RESult; "err" = ERRor
+
+
+
+# Make shure that mounting Directory exists
+if [ ! -d /mnt/usb1 ]
+then
+    mkdir /mnt/usb1
+fi
+
+# Make shure that result Directory exists
+if [ ! -d /test/result ]
+then
+    mkdir /test/result
+fi
+
+# Make shure that result file of Test does NOT exists
+if [ -s /test/result/usb1.res ]
+then
+    rm /test/result/usb1.res
+fi
+
+# Make shure that error file of Test does NOT exists
+if [ -s /test/result/usb1.err ]
+then
+    rm /test/result/usb1.err
+fi
+
+# Mount USB-Stick to /mnt/usb1
+mount /dev/sda1 /mnt/usb1 2>> /test/result/usb1.err
+
+# Copy Testfile from Test Directory to USB-Stick
+cp /test/testfile /mnt/usb1 2>> /test/result/usb1.err
+
+# Compare original Testfile and copied Testfile on USB-Stick
+# Print compare results to /test/result/usb1.res
+# Print compare errors to /test/result/usb1.err
+if [ ! -e /mnt/usb1/testfile ]
+then
+    echo "TESTFILE DOES NOT EXIST" >> /test/result/usb1.err
+fi
+diff /test/testfile /mnt/usb1/testfile 1>> /test/result/usb1.res 
+                                                                                    2>> /test/result/usb1.err
+
+# Delete Testfile on USB-Stick
+rm /mnt/usb1/testfile 2>> /test/result/usb1.err
+
+# Unmount USB-Stick
+umount /mnt/usb1 2>> /test/result/usb1.err
+
+# Delete Folder usb1 in /mnt
+rmdir /mnt/usb1 2>> /test/result/usb1.err
+
+# Display content of /test/result/usb1.res
+echo -e "\n\rContent of usb1.res"
+cat /test/result/usb1.res
+
+# Display content of /test/result/usb1.err
+echo -e "\n\rContent of usb1.err"
+cat /test/result/usb1.err
+
+# If comparison returned neither results nor errors, the copying and comparision was successful
+if [ ! -s /test/result/usb1.res -a ! -s /test/result/usb1.err ]
+then
+    # Test was successful
+    echo -e "\n\rUSB1 TEST-PASSED"
+    echo "USB1 TEST-PASSED"  >> /test/result/usb1.res
+else
+    # Test failed
+    echo -e "\n\rUSB1 TEST-FAIL"
+    echo "USB1 TEST-FAILED"  >> /test/result/usb1.res
+fi

Tester/HW/PCB/stimuliBoard.REP

@@ -0,0 +1,25 @@
+*************************************************************
+FileName = stimuliBoard.GBR
+AutoAperture = True
+*************************************************************
+Generating : Top Overlay
+      File : stimuliBoard.GTO
+
+    Adding Layer      : Top Overlay
+
+
+Used DCodes :
+    D10
+    D11
+    D12
+    D13
+    D14
+    D15
+    D16
+    D17
+    D18
+    D19
+    D20
+    D21
+*************************************************************
+

Tester/HW/PCB/stimuliBoard.RUL

@@ -0,0 +1,18 @@
+DRC Rules Export File for PCB: P:\QUA_2475\Tester\HW\PCB\stimuliBoard.PcbDoc
+RuleKind=Width|RuleName=C71|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=GND|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=C72|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=D50|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=VIO|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=V24|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=VIN|Scope=Board|Minimum=31.50
+RuleKind=Width|RuleName=VCC_ETH|Scope=Board|Minimum=7.87
+RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0
+RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=4.00
+RuleKind=Width|RuleName=VCC|Scope=Board|Minimum=7.87
+RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=Signal|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=VCC_ANA|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=VCC_SD|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=VIN_DIGI|Scope=Board|Minimum=7.87
+RuleKind=Width|RuleName=F2_1|Scope=Board|Minimum=7.87

Tester/HW/PCB/stimuliBoard.pcbdoc_viewstate

@@ -0,0 +1,11 @@
+[PCBViewState.Preferences]
+Current2D3DViewState=2D
+PCBViewPort=Lx=3893684|Hx=92943684|Ly=24587895|Hy=84074739
+2DConfigType=.config_2dsimple
+2DConfiguration=RECORD=Board|CFGALL.CONFIGURATIONKIND=1|CFGALL.CONFIGURATIONDESC=Altium%20Standard%202D|CFG2D.PRIMDRAWMODE=00000000020000020000000|CFG2D.LAYEROPACITY=1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0|CFG2D.TOGGLELAYERS=1111111111111111111111111111111110000011111111111111110000000000000000000011101111|CFG2D.WORKSPACECOLALPHA0=1.0|CFG2D.WORKSPACECOLALPHA1=1.0|CFG2D.WORKSPACECOLALPHA2=1.0|CFG2D.WORKSPACECOLALPHA3=1.0|CFG2D.WORKSPACECOLALPHA4=1.0|CFG2D.WORKSPACECOLALPHA5=1.0|CFG2D.WORKSPACECOLALPHA6=1.0|CFG2D.MECHLAYERINSINGLELAYERMODE=0000000000000000|CFG2D.MECHLAYERLINKEDTOSHEET=0000000000000000|CFG2D.CURRENTLAYER=BOTTOM|CFG2D.DISPLAYSPECIALSTRINGS=FALSE|CFG2D.SHOWTESTPOINTS=FALSE|CFG2D.SHOWORIGINMARKER=TRUE|CFG2D.SHOWSTATUSINFO=TRUE|CFG2D.SHOWPADNETS=TRUE|CFG2D.SHOWPADNUMBERS=TRUE|CFG2D.SHOWVIANETS=TRUE|CFG2D.USETRANSPARENTLAYERS=FALSE|CFG2D.PLANEDRAWMODE=2|CFG2D.DISPLAYNETNAMESONTRACKS=1|CFG2D.FROMTOSDISPLAYMODE=0|CFG2D.PADTYPESDISPLAYMODE=0|CFG2D.SINGLELAYERMODESTATE=1|CFG2D.ORIGINMARKERCOLOR=16777215|CFG2D.SHOWCOMPONENTREFPOINT=FALSE|CFG2D.COMPONENTREFPOINTCOLOR=16777215|CFG2D.POSITIVETOPSOLDERMASK=FALSE|CFG2D.POSITIVEBOTTOMSOLDERMASK=FALSE|CFG2D.TOPPOSITIVESOLDERMASKALPHA=0.500000|CFG2D.BOTTOMPOSITIVESOLDERMASKALPHA=0.500000
+2DConfigFullFileName=(Not Saved)
+3DConfigType=.config_3d
+3DConfiguration=
+3DConfigFullFileName=(Not Saved)
+3DCameraPosition=|LookAt.x=0|LookAt.y=0|LookAt.z=0|EyeRotation.x=0|EyeRotation.y=0|EyeRotation.z=0|EyeRotation.w=1|ZoomMult=1.38686131386861E-5|ViewSize.x=377|ViewSize.y=343
+ViewState_BoardFlipped=False

Tester/HW/SCH/Library/stimuliBoard.pcblib_viewstate

@@ -0,0 +1,11 @@
+[PCBViewState.Preferences]
+Current2D3DViewState=2D
+PCBViewPort=Lx=495789837|Hx=504032450|Ly=497312568|Hy=504388305
+2DConfigType=.config_2dsimple
+2DConfiguration=RECORD=Board|CFGALL.CONFIGURATIONKIND=1|CFGALL.CONFIGURATIONDESC=Altium%20Standard%202D|CFG2D.PRIMDRAWMODE=00000000000000000000000|CFG2D.LAYEROPACITY=1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0;1.0|CFG2D.TOGGLELAYERS=1000000000000000000000000000000111111100000000000000001100000000000000001111101111|CFG2D.WORKSPACECOLALPHA0=1.0|CFG2D.WORKSPACECOLALPHA1=1.0|CFG2D.WORKSPACECOLALPHA2=1.0|CFG2D.WORKSPACECOLALPHA3=1.0|CFG2D.WORKSPACECOLALPHA4=1.0|CFG2D.WORKSPACECOLALPHA5=1.0|CFG2D.WORKSPACECOLALPHA6=1.0|CFG2D.MECHLAYERINSINGLELAYERMODE=0000000000000000|CFG2D.MECHLAYERLINKEDTOSHEET=0000000000000000|CFG2D.CURRENTLAYER=TOP|CFG2D.DISPLAYSPECIALSTRINGS=FALSE|CFG2D.SHOWTESTPOINTS=FALSE|CFG2D.SHOWORIGINMARKER=TRUE|CFG2D.SHOWSTATUSINFO=TRUE|CFG2D.SHOWPADNETS=TRUE|CFG2D.SHOWPADNUMBERS=TRUE|CFG2D.SHOWVIANETS=TRUE|CFG2D.USETRANSPARENTLAYERS=FALSE|CFG2D.PLANEDRAWMODE=2|CFG2D.DISPLAYNETNAMESONTRACKS=1|CFG2D.FROMTOSDISPLAYMODE=0|CFG2D.PADTYPESDISPLAYMODE=0|CFG2D.SINGLELAYERMODESTATE=3|CFG2D.ORIGINMARKERCOLOR=16777215|CFG2D.SHOWCOMPONENTREFPOINT=FALSE|CFG2D.COMPONENTREFPOINTCOLOR=16777215|CFG2D.POSITIVETOPSOLDERMASK=FALSE|CFG2D.POSITIVEBOTTOMSOLDERMASK=FALSE|CFG2D.TOPPOSITIVESOLDERMASKALPHA=0.500000|CFG2D.BOTTOMPOSITIVESOLDERMASKALPHA=0.500000
+2DConfigFullFileName=C:\Documents and Settings\mmi\Application Data\AltiumDesignerSummer08\ViewConfigurations\Altium Standard 2D.config_2dsimple
+3DConfigType=.config_3d
+3DConfiguration=
+3DConfigFullFileName=(Not Saved)
+3DCameraPosition=|LookAt.x=0|LookAt.y=0|LookAt.z=0|EyeRotation.x=0|EyeRotation.y=0|EyeRotation.z=0|EyeRotation.w=1|ZoomMult=0.000120835474151524|ViewSize.x=377|ViewSize.y=343
+ViewState_BoardFlipped=False

Tester/HW/SCH/stimuliBoard.Dat

@@ -0,0 +1,102 @@
+Field=Designator~String~Designator~100|Field=Value~String~Value~100|Field=Manufacturer~String~Manufacturer~100|Field=Description~String~Description~100|Field=Manufacturer Code~String~Manufacturer Code~100|Field=Farnell Order Code~String~Farnell Order Code~100|Field=Footprint~String~Footprint~100|Field=Quantity~Integer~Quantity~100|ReportField=ProjectFileName~stimuliBoard.PrjPCB|ReportField=ProjectFullPath~P:\QUA_2475\Tester\HW\SCH\stimuliBoard.PrjPCB|ReportField=Title~Bill of Materials For Project [stimuliBoard.PrjPCB] (No PCB Document Selected)|ReportField=TotalQuantity~531|ReportField=ReportTime~14:37:29|ReportField=ReportDate~28-10-2008|ReportField=ReportDateTime~28-10-2008 14:37:29|ReportField=OutputName~Bill of Materials|ReportField=OutputType~BOM_PartType|ReportField=GeneratorName~BOM|ReportField=GeneratorDescription~Bill of Materials|ReportField=VariantName~None|ReportField=SheetTotal~19|ReportField=Address1~|ReportField=Address2~|ReportField=Address3~|ReportField=Address4~|ReportField=ApprovedBy~|ReportField=Author~|ReportField=CheckedBy~GSC|ReportField=CompanyName~|ReportField=ConfigurationParameters~|ReportField=ConfiguratorName~|ReportField=CurrentDate~28-10-2008|ReportField=CurrentTime~14:37:22|ReportField=Date~|ReportField=DocumentFullPathAndName~P:\QUA_2475\Tester\HW\SCH\TOP.SchDoc|ReportField=DocumentName~TOP.SchDoc|ReportField=DocumentNumber~1|ReportField=DrawnBy~MMi|ReportField=Engineer~|ReportField=ImagePath~|ReportField=ModifiedDate~28-10-2008|ReportField=Organization~|ReportField=Revision~A|ReportField=Rule~|ReportField=SheetNumber~1|ReportField=Time~|ReportField=Title~TOP_SHEET|ReportField=DataSourceFileName~stimuliBoard.PrjPCB|ReportField=DataSourceFullPath~P:\QUA_2475\Tester\HW\SCH\stimuliBoard.PrjPCB
+C1|100uF_Hi-Cap||Capacitor 1210|||C1210|1
+C2, C7, C15, C47, C50, C51, C52, C53, C54, C56, C57, C58, C59, C60, C61, C62, C63, C64, C65, C66, C67, C75, C77, C82, C83, C86, C87, C88, C89, C90, C91, C92, C102, C109, C116|100nF|||||0603|35
+C3, C4, C5, C6, C16, C17, C18, C19, C20, C21, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44, C45, C46, C72, C101, C118, C119, C120, C121, C122, C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133|10nF|||||0603|52
+C8, C117|10uF_Hi-Cap||Capacitor 1210|||C1210|2
+C9, C10, C11, C12, C13, C14, C22, C93, C94, C95, C96, C97, C98, C99, C100, C103, C104, C105, C106, C107, C108, C110, C111, C112, C113, C114, C115|1nF|||||0603|27
+C48, C49, C55|10uF/6.3V|Panasonic|SMD ELKO 1210|||C1210|3
+C68, C69|12pF|||||0603|2
+C70, C71|7pF|||||0603|2
+C73, C76|1uF_50V||Capacitor 1210|||C1210|2
+C74, C79|470uF/16V|Panasonic|SMD ELKO|||ELKO|2
+C78|220uF/35V|Panasonic|SMD ELKO|||ELKO|1
+C80|1uF/16V|Panasonic|SMD ELKO 1210|||C1210|1
+C81, C84, C85|22uF_16V||Capacitor 1210|||C1210|3
+D1, D2, D56, D57, D58, D59, D60, D61|||Schottky Barrier Diode Common Anode en Cathode|BAT54S||SOT23|8
+D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D47, D48, D55|||Red LED 0603|||0603|15
+D15|||Silicon Switching Diode for High-Speed Switching|BAS16||SOT-23|1
+D16, D18, D20, D22, D24, D26, D28, D30, D32, D34, D36, D38, D40, D42, D44, D45, D46, D49, D62, D64, D66, D68|||Green LED 0603|||0603|22
+D17, D19, D21, D23, D25, D27, D29, D31, D33, D35, D37, D39, D41, D43, D63, D65, D67, D69|||General-purpose Schottky diodes quadruple 2-series|BAS40XY||SOT363|18
+D50||||||S3A|1
+D51||ST|Voltage suppression diode|SMBJ33CA-TR|9886265|DO214|1
+D52|||Surface Mount Scottky Power Rectifier|MBRS340T3G|9557377|CASE 403_03|1
+D53, D54|||Silicon Switching Diode for High-Speed Switching|BAS16||SOT-23|2
+F1, F2||Bourns|MF-R Series - PTC Resettable Fuses. 1A@60C|MF-R135-0-99|9350470|53|2
+J1||Harting|Receptacle Assembly, 9 Position, Right Angle|09 65 161 6712|1097056|DSUB1.385-2H9|1
+J2||Multicomp|SD/MMC Card connector|SDAMB-01215BT00|9186140|SDAMB-012|1
+L1, L2, L3, L4, L5, L6|||Inductor|BLMTG601TN1||L0603|6
+L7, L8, L9, L10, L11, L12, L13, L14|||Inductor|BLM31PG601SN1L||1206|8
+L15|||Inductor|FB0805||L0603|1
+L16|||Inductor|FB0B05||L0603|1
+L17|22uH|Tyco|Surface Mount Power Inductor|3631B220ML|1174026|TYCO_3631_B|1
+L18||TDK|ACM3225-601-2P-T001||9621377|CHOKE|1
+L19|||Inductor|1uH_SIMID||C1210|1
+L20|||BLM31PG121SN1L Inductor 1210|BLM31PG121SN1L||C1210|1
+L21, L22, L23, L24|||Inductor|BLM18TG601N||L0603|4
+L25, L26, L27, L28|||Inductor|BLM18TG601N1||L0603|4
+L29|||Inductor|BLM18TG601TN1||L0603|1
+P1|||1x18 Pin row, Grid 2.54|||HEAD_18|1
+P2, P3, P10, P12||Phoenix|Header pitch: 5.08 mm, no. of positions: 9|MSTBV/9-G-5.08||HEAD_PH_9|4
+P4, P5, P17||Phoenix|Header pitch: 5.08 mm, no. of positions: 8|MSTBV/8-G-5.08||HEAD_PH_8|3
+P6|||1x16 Pin row, Grid 2,54|||HEAD_16|1
+P7, P9, P19|||1x2Pin row, Grid 2.54, Header, 2-Pin|||HDR1X2|3
+P8|||Header, 3-Pin|||HDR1X3|1
+P11, P13, P18||Phoenix|Header pitch: 5.08 mm, no. of positions: 4|MSTBV/4-G-5.08||HEAD_PH_4|3
+P14||Wuerth|CONNECTOR WE-LAN INTEGRATED RJ-45|7499011001|1636374|RJ45_MHRJJ88NFRAS|1
+P15|||2x10 Pin row, Grid 2.54|||HEAD_2x10|1
+P16||Phoenix|Header pitch: 5.08 mm, no. of positions: 2|MSTBV/2-G-5.08||HEAD_PH_2|1
+P20, P21||MH Connectors|SOCKET, RJ45|MHRJJ88NFRAS|3938384|RJ45_MHRJJ88NFRAS|2
+Q1, Q2, Q12, Q13, Q14, Q15, Q16, Q17||Fairchild|N-Channel 1.8 Vgs Specified PowerTrench MOSFET|FDN327N||SuperSOT-3|8
+Q3||Aker|50 MHz Oscillator|S23305-50.000-X|1538936|CRYSTAL_50MHz|1
+Q4, Q5|||NPN General Purpose Amplifier|||SOT23|2
+Q6|||CRYSTAL, CX5032GB12000|||CX5032|1
+Q7||Citizen|32.768kHz tunning fork crystal|CM519 32.768KDZF-UT|1457194|CM519|1
+Q8, Q9, Q11|||NPN General Purpose Amplifier|BC817-40||TO-92A|3
+Q10|||MOSFET, FDN304P|FDN304P||SuperSOT-3|1
+R1, R5, R163, R167, R171, R175, R179, R183|30K||Resistor|||0603|8
+R2, R6, R164, R168, R172, R176|470/0.5W||Resistor 1210|||C1210|6
+R3, R7, R165, R169, R173, R177, R181, R185|20K||Resistor|||0603|8
+R4, R8, R166, R170, R174, R178, R182, R186|2K2||Resistor|||0603|8
+R9, R10, R11, R19, R27, R35, R43, R51, R59, R63, R77, R78, R79, R80, R81, R82, R83, R84, R119, R122, R134, R135, R137, R138, R139, R140, R141, R142, R143, R144, R145, R146, R153|10K||Resistor|||0603|33
+R12, R13, R16, R17, R20, R21, R24, R25, R28, R29, R32, R33, R36, R37, R40, R41, R44, R45, R48, R49, R52, R53, R56, R57|130k||Resistor|||0603|24
+R14, R15, R22, R23, R30, R31, R38, R39, R46, R47, R54, R55|169||Resistor|||0603|12
+R18, R26, R34, R42, R50, R58|15k||Resistor|||0603|6
+R60, R61, R130|4K7||Resistor|||0603|3
+R62|120||Resistor|||0603|1
+R64, R65, R66, R67, R68, R69, R70, R71, R73, R74, R75, R76|9K1||Resistor|||0603|12
+R72|0||Resistor|||0603|1
+R85, R86, R87, R89, R91, R93, R95, R97, R99, R101, R103, R105, R107, R109, R111, R113, R123, R147, R148, R187, R189, R191, R193|1K||Resistor|||0603|23
+R88, R90, R92, R94, R96, R98, R100, R102, R104, R106, R108, R110, R112, R114, R188, R190, R192, R194|5K6||Resistor 1206|||1206|18
+R115, R116, R117, R118|49.9/1%||Resistor|||0603|4
+R120|4.99K/1%||Resistor|||0603|1
+R121|1.5K/1%||Resistor|||0603|1
+R124, R125, R126, R127|220||Resistor|||0603|4
+R128, R160|330||Resistor|||0603|2
+R129|100K||Resistor|||0603|1
+R131, R132|680||Resistor|||0603|2
+R133, R149, R150, R151, R152, R154, R155, R156, R157, R158, R159|33K||Resistor|||0603|11
+R136, R161|3K3||Resistor|||0603|2
+R162|2K||Resistor|||0603|1
+R180, R184|460/0.5W||Resistor 1210|||C1210|2
+S1|||Switch|||SPST-2|1
+T1, T2, T3, T4, T5, T6||NXP|NPN, BCX55-16|BCX55-16|1081279|SOT89|6
+U1, U4, U7, U10, U27, U28||Maxim|QUAD SPST Analog Switch|MAX4533CAP+|1379970|SSOP20|6
+U2||Microchip|2.7V 8-Channel 12-Bit A/D Converters with SPI|MCP3208-CI/SL|1084270|SOIC16|1
+U3, U12||Microchip|4.096V Voltage Reference|MCP1541(T)-I/TT|1084310|SOT23|2
+U5, U6||Microchip|Rail-to-Rail Input/Output, 10 MHz Op Amps|MCP6024-I/SL|129247|SOIC16|2
+U8, U9, U11||Microchip|12-Bit DAC with SPI Interface|MCP4922(T)-E/ST||TSSOP14|3
+U13, U15, U17, U19, U21, U23||National Semiconductors|Low Power Dual Operational Amplifiers|LM358A||SO8|6
+U14, U16, U18, U20, U22, U24||Maxim|DUAL SPST ANALOG_SWITCHES, MAX4700CAE|MAX4700CAE||TSSOP16|6
+U25||Microchip|High Speed Can Transceiver|MCP2551||SOIC150-8_N|1
+U26||Infineon|Smart Power High-Side-Switch Eight Channels|ITS4880R|1440818|PowerSO36|1
+U29, U30, U31, U32, U33, U34, U35, U36, U37, U38, U39, U40, U41, U42, U54, U55, U56, U57||Agilent|DC Input Phototransistor Optocoupler SMD Mini-Flat|||SO8_special|18
+U43||Micrel|Transceiver PHY Layer 3.3V|KSZ8721BL|1517240|LQFP-48_L|1
+U44||NXP|ARM7 16/32-Bit Microcontroller, 512KB Flash, 58KB RAM, 4 Channel CAN, 144-Lead LQFP|LPC 2378 144||SOT486-1_N|1
+U45||Microchip|512 Kbit Serial SPI bus EEPROM with high speed clock|25LC512-I/SN|1556153|SOIC8|1
+U46||Texas Instruments|Octal dual supply translating transceiver; 3-state|SN74LVC4245ADBR|1470927|TSSOP24|1
+U47||National Semiconductors|High Efficiency 5A Step-Down Volttage Regulator|LM2678S-5.0|1469215|TS7B|1
+U48||National Semiconductors|5A Low Dropout Fast Response Regulators|LMS1585AIS-3.3||TO-263|1
+U49||National Semiconductor|ADJ Voltage Regulator||9779272|SOT223|1
+U50||Microchip|Voltage Supervisory Circuit|MCP120T-475I/TT||SOT23|1
+U51||ST|3 to 5.5V, Low power, up to 400Kbps RS-232 Drivers|ST3232CTR||TSSOP16|1
+U52, U53||Texas Instruments|3.3-V RS-485 TRANSCEIVERS|SN75HVD12D(G4)|1470461|SOIC8|2

Tester/HW/SCH/stimuliBoard.PrjPCBStructure

@@ -0,0 +1,50 @@
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE1|SchDesignator=U_ANA_IN_FE1|FileName=ANA_IN_FE.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE2|SchDesignator=U_ANA_IN_FE2|FileName=ANA_IN_FE_B.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_B.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE3|SchDesignator=U_ANA_IN_FE3|FileName=ANA_IN_FE_C.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_C.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE4|SchDesignator=U_ANA_IN_FE4|FileName=ANA_IN_FE_D.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_D.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE5|SchDesignator=U_ANA_IN_FE5|FileName=ANA_IN_FE.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE6|SchDesignator=U_ANA_IN_FE6|FileName=ANA_IN_FE_B.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_B.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE7|SchDesignator=U_ANA_IN_FE7|FileName=ANA_IN_FE_C.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_C.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_IN.SchDoc|Designator=U_ANA_IN_FE8|SchDesignator=U_ANA_IN_FE8|FileName=ANA_IN_FE_D.SchDoc|SymbolType=Normal|RawFileName=ANA_IN_FE_D.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=ANA_OUT.SchDoc|Designator=U_ANA_OUT_BE|SchDesignator=U_ANA_OUT_BE|FileName=ANA_OUT_BE.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT_BE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE1|SchDesignator=U_DIGI_IN_FE1|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE2|SchDesignator=U_DIGI_IN_FE2|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE3|SchDesignator=U_DIGI_IN_FE3|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE4|SchDesignator=U_DIGI_IN_FE4|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE5|SchDesignator=U_DIGI_IN_FE5|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE6|SchDesignator=U_DIGI_IN_FE6|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE7|SchDesignator=U_DIGI_IN_FE7|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE8|SchDesignator=U_DIGI_IN_FE8|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE9|SchDesignator=U_DIGI_IN_FE9|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE10|SchDesignator=U_DIGI_IN_FE10|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE11|SchDesignator=U_DIGI_IN_FE11|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=DIGI_IN.SchDoc|Designator=U_DIGI_IN_FE12|SchDesignator=U_DIGI_IN_FE12|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN.SchDoc|Designator=U_DIGI_IN_FE13|SchDesignator=U_DIGI_IN_FE13|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN.SchDoc|Designator=U_DIGI_IN_FE14|SchDesignator=U_DIGI_IN_FE14|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN.SchDoc|Designator=U_DIGI_IN_FE15|SchDesignator=U_DIGI_IN_FE15|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN.SchDoc|Designator=U_DIGI_IN_FE16|SchDesignator=U_DIGI_IN_FE16|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN_EB.SchDoc|Designator=U_DIGI_IN_FE17|SchDesignator=U_DIGI_IN_FE17|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=RLY_IN_EB.SchDoc|Designator=U_DIGI_IN_FE18|SchDesignator=U_DIGI_IN_FE18|FileName=DIGI_IN_FE.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN_FE.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_ANA_IN|SchDesignator=U_ANA_IN|FileName=ANA_IN.SchDoc|SymbolType=Normal|RawFileName=ANA_IN.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_ANA_OUT|SchDesignator=U_ANA_OUT|FileName=ANA_OUT.SchDoc|SymbolType=Normal|RawFileName=ANA_OUT.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_CAN|SchDesignator=U_CAN|FileName=CAN.SchDoc|SymbolType=Normal|RawFileName=CAN.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_DIG_OUT|SchDesignator=U_DIG_OUT|FileName=DIG_OUT.SchDoc|SymbolType=Normal|RawFileName=DIG_OUT.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_DIGI_IN|SchDesignator=U_DIGI_IN|FileName=DIGI_IN.SchDoc|SymbolType=Normal|RawFileName=DIGI_IN.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_Ethernet|SchDesignator=U_Ethernet|FileName=Ethernet.SchDoc|SymbolType=Normal|RawFileName=Ethernet.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_LPC2378_IO|SchDesignator=U_LPC2378_IO|FileName=LPC2378_IO.SchDoc|SymbolType=Normal|RawFileName=LPC2378_IO.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_LPC2378_MISC|SchDesignator=U_LPC2378_MISC|FileName=LPC2378_MISC.SchDoc|SymbolType=Normal|RawFileName=LPC2378_MISC.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_LPC2378_Power|SchDesignator=U_LPC2378_Power|FileName=LPC2378_Power.SchDoc|SymbolType=Normal|RawFileName=LPC2378_Power.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_LPC2378_SYS|SchDesignator=U_LPC2378_SYS|FileName=LPC2378_SYS.SchDoc|SymbolType=Normal|RawFileName=LPC2378_SYS.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_Power|SchDesignator=U_Power|FileName=Power.SchDoc|SymbolType=Normal|RawFileName=Power.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_RLY_IN|SchDesignator=U_RLY_IN|FileName=RLY_IN.SchDoc|SymbolType=Normal|RawFileName=RLY_IN.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_RLY_IN_EB|SchDesignator=U_RLY_IN_EB|FileName=RLY_IN_EB.SchDoc|SymbolType=Normal|RawFileName=RLY_IN_EB.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_RS232|SchDesignator=U_RS232|FileName=RS232.SchDoc|SymbolType=Normal|RawFileName=RS232.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_RS485|SchDesignator=U_RS485|FileName=RS485.SchDoc|SymbolType=Normal|RawFileName=RS485.SchDoc|ObjectKind=Sheet Symbol
+Record=SheetSymbol|SourceDocument=TOP.SchDoc|Designator=U_SD_CARD|SchDesignator=U_SD_CARD|FileName=SD_CARD.SchDoc|SymbolType=Normal|RawFileName=SD_CARD.SchDoc|ObjectKind=Sheet Symbol
+Record=TopLevelDocument|FileName=TOP.SchDoc
+Record=HARD_PROCESSOR_COMPONENT|BaseComponentDesignator=U23|DocumentName=LPC2378_IO.SchDoc|LibraryReference=LPC2378FBD144|SubProjectPath= |Configuration= |Description=ARM7 16/32-Bit Microcontroller, 512KB Flash, 58KB RAM, 4 Channel CAN, 144-Lead LQFP|SubPartUniqueId1=VXUTYTAN|SubPartDocPath1=LPC2378_IO.SchDoc|SubPartUniqueId2=ACTQIEXB|SubPartDocPath2=LPC2378_SYS.SchDoc|SubPartUniqueId3=DGSALGJH|SubPartDocPath3=LPC2378_SYS.SchDoc|SubPartUniqueId4=KWCDNYKX|SubPartDocPath4=LPC2378_Power.SchDoc|SubPartUniqueId5=NJDFKTYJ|SubPartDocPath5=LPC2378_SYS.SchDoc

Tester/HW/SCH/stimuliBoard.txt

@@ -0,0 +1,97 @@
+Field=Designator~String~Designator~100|Field=Value~String~Value~100|Field=Manufacturer~String~Manufacturer~100|Field=Description~String~Description~100|Field=Manufacturer Code~String~Manufacturer Code~100|Field=Farnell Order Code~String~Farnell Order Code~100|Field=Footprint~String~Footprint~100|Field=Quantity~Integer~Quantity~100|ReportField=ProjectFileName~stimuliBoard.PrjPCB|ReportField=ProjectFullPath~P:\QUA_2475\Tester\HW\SCH\stimuliBoard.PrjPCB|ReportField=Title~BOM_MLA08_274_RA For Project [stimuliBoard.PrjPCB] (No PCB Document Selected)|ReportField=TotalQuantity~531|ReportField=ReportTime~15:44:18|ReportField=ReportDate~8-12-2008|ReportField=ReportDateTime~8-12-2008 15:44:18|ReportField=OutputName~BOM_MLA08_274_RA|ReportField=OutputType~BOM_PartType|ReportField=GeneratorName~BOM|ReportField=GeneratorDescription~Bill of Materials|ReportField=VariantName~None|ReportField=SheetTotal~19|ReportField=Address1~|ReportField=Address2~|ReportField=Address3~|ReportField=Address4~|ReportField=ApprovedBy~|ReportField=Author~|ReportField=CheckedBy~GSC|ReportField=CompanyName~|ReportField=ConfigurationParameters~|ReportField=ConfiguratorName~|ReportField=CurrentDate~8-12-2008|ReportField=CurrentTime~15:43:55|ReportField=Date~|ReportField=DocumentFullPathAndName~P:\QUA_2475\Tester\HW\SCH\TOP.SchDoc|ReportField=DocumentName~TOP.SchDoc|ReportField=DocumentNumber~1|ReportField=DrawnBy~MMi|ReportField=Engineer~|ReportField=ImagePath~|ReportField=ModifiedDate~5-11-2008|ReportField=Organization~|ReportField=Revision~A|ReportField=Rule~|ReportField=SheetNumber~1|ReportField=Time~|ReportField=Title~TOP_SHEET|ReportField=DataSourceFileName~stimuliBoard.PrjPCB|ReportField=DataSourceFullPath~P:\QUA_2475\Tester\HW\SCH\stimuliBoard.PrjPCB
+C1, C8, C117|10uF_Hi-Cap|muRata|Capacitor 1210|GRM31CR70J106KA01L||C1210|3
+C2, C7, C15, C47, C50, C51, C52, C53, C54, C56, C57, C58, C59, C60, C61, C62, C63, C64, C65, C66, C67, C75, C77, C82, C83, C86, C87, C88, C89, C90, C91, C92, C102, C109, C116|100nF|||||0603|35
+C3, C4, C5, C6, C16, C17, C18, C19, C20, C21, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44, C45, C46, C72, C101, C118, C119, C120, C121, C122, C123, C124, C125, C126, C127, C128, C129, C130, C131, C132, C133|10nF|||||0603|52
+C9, C10, C11, C12, C13, C14, C22, C93, C94, C95, C96, C97, C98, C99, C100, C103, C104, C105, C106, C107, C108, C110, C111, C112, C113, C114, C115|1nF|||||0603|27
+C48, C49, C55, C80|10uF/6.3V|KEMET|SMD ELKO 1210|T491B106K006AT|1457434|C1210|4
+C68, C69|12pF|||||0603|2
+C70, C71|7pF|||||0603|2
+C73, C76|1uF_50V|muRata|Capacitor 1210|GRM32RR71H105KA01L||C1210|2
+C74, C79|470uF/16V|Panasonic|SMD ELKO|||ELKO|2
+C78|220uF/35V|Panasonic|SMD ELKO|EEEFK1V221P||ELKO|1
+C81, C84, C85|22uF_16V|muRata|Capacitor 1210|GRM32ER61C226KE20L||C1210|3
+D1, D2, D56, D57, D58, D59, D60, D61|||Schottky Barrier Diode Common Anode en Cathode|BAT54S||SOT23|8
+D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D47, D48, D55|||Red LED 0603|||0603|15
+D15|||Silicon Switching Diode for High-Speed Switching|BAS16||SOT-23|1
+D16, D18, D20, D22, D24, D26, D28, D30, D32, D34, D36, D38, D40, D42, D44, D45, D46, D49, D62, D64, D66, D68|||Green LED 0603|||0603|22
+D17, D19, D21, D23, D25, D27, D29, D31, D33, D35, D37, D39, D41, D43, D63, D65, D67, D69|||General-purpose Schottky diodes quadruple 2-series|BAS40XY||SOT363|18
+D50||||||S3A|1
+D51||ST|Voltage suppression diode|SMBJ33CA-TR|9886265|DO214|1
+D52|||Surface Mount Scottky Power Rectifier|MBRS340T3G|9557377|CASE 403_03|1
+D53, D54|||Silicon Switching Diode for High-Speed Switching|BAS16||SOT-23|2
+F1, F2||Bourns|MF-R Series - PTC Resettable Fuses. 1A@60C|MF-R135-0-99|9350470|53|2
+J1||Harting|Receptacle Assembly, 9 Position, Right Angle|09 65 161 6712|1097056|DSUB1.385-2H9|1
+J2||Multicomp|SD/MMC Card connector|SDAMB-01215BT00|9186140|SDAMB-012|1
+L1, L2, L3, L4, L5, L6, L29|||Inductor|BLM18TG601TN1, BLMTG601TN1||L0603|7
+L7, L8, L9, L10, L11, L12, L13, L14|||Inductor|BLM31PG601SN1L||1206|8
+L15|||Inductor|FB0805||L0603|1
+L16|||Inductor|FB0B05||L0603|1
+L17|22uH|Tyco|Surface Mount Power Inductor|3631B220ML|1174026|TYCO_3631_B|1
+L18||TDK|ACM3225-601-2P-T001||9621377|CHOKE|1
+L19||EPCOS|Inductor|B82422-T1102||C1210|1
+L20|||BLM31PG121SN1L Inductor 1210|BLM31PG121SN1L||C1210|1
+L21, L22, L23, L24, L25, L26, L27, L28|||Inductor|BLM18TG601N1||L0603|8
+P1|||1x18 Pin row, Grid 2.54|||HEAD_18|1
+P2, P3, P10, P12||Phoenix|Header pitch: 5.08 mm, no. of positions: 9|MSTBV/9-G-5.08||HEAD_PH_9|4
+P4, P5, P17||Phoenix|Header pitch: 5.08 mm, no. of positions: 8|MSTBV/8-G-5.08||HEAD_PH_8|3
+P6|||1x16 Pin row, Grid 2,54|||HEAD_16|1
+P7, P9, P19|||1x2Pin row, Grid 2.54, Header, 2-Pin|||HDR1X2|3
+P8|||Header, 3-Pin|||HDR1X3|1
+P11, P13, P18||Phoenix|Header pitch: 5.08 mm, no. of positions: 4|MSTBV/4-G-5.08||HEAD_PH_4|3
+P14||Wuerth|CONNECTOR WE-LAN INTEGRATED RJ-45|7499011001|1636374|RJ45_MHRJJ88NFRAS|1
+P15|||2x10 Pin row, Grid 2.54|||HEAD_2x10|1
+P16||Phoenix|Header pitch: 5.08 mm, no. of positions: 2|MSTBV/2-G-5.08||HEAD_PH_2|1
+P20, P21||MH Connectors|SOCKET, RJ45|MHRJJ88NFRAS|3938384|RJ45_MHRJJ88NFRAS|2
+Q1, Q2, Q12, Q13, Q14, Q15, Q16, Q17||Fairchild|N-Channel 1.8 Vgs Specified PowerTrench MOSFET|FDN327N||SuperSOT-3|8
+Q3||Aker|50 MHz Oscillator|S23305-50.000-X|1538936|CRYSTAL_50MHz|1
+Q4, Q5|||BC817-40|||SOT23|2
+Q6||AVX|CRYSTAL, CX5032GB12000|CX5032GB12000H0PESZZ||CX5032|1
+Q7||Citizen|32.768kHz tunning fork crystal|CM519 32.768KDZF-UT|1457194|CM519|1
+Q8, Q9, Q11|||NPN General Purpose Amplifier|BC817-40||TO-92A|3
+Q10|||MOSFET, FDN304P|FDN304P||SuperSOT-3|1
+R1, R5, R163, R167, R171, R175, R179, R183|30K||Resistor|||0603|8
+R2, R6, R164, R168, R172, R176, R180, R184|470/0.5W|PHYCOMP|Resistor 1210|232276164||C1210|8
+R3, R7, R165, R169, R173, R177, R181, R185|20K||Resistor|||0603|8
+R4, R8, R166, R170, R174, R178, R182, R186|2K2||Resistor|||0603|8
+R9, R10, R11, R19, R27, R35, R43, R51, R59, R63, R77, R78, R79, R80, R81, R82, R83, R84, R119, R122, R134, R135, R137, R138, R139, R140, R141, R142, R143, R144, R145, R146, R153|10K||Resistor|||0603|33
+R12, R13, R16, R17, R20, R21, R24, R25, R28, R29, R32, R33, R36, R37, R40, R41, R44, R45, R48, R49, R52, R53, R56, R57|130k||Resistor|||0603|24
+R14, R15, R22, R23, R30, R31, R38, R39, R46, R47, R54, R55|169||Resistor|||0603|12
+R18, R26, R34, R42, R50, R58|15k||Resistor|||0603|6
+R60, R61, R130|4K7||Resistor|||0603|3
+R62|120||Resistor|||0603|1
+R64, R65, R66, R67, R68, R69, R70, R71, R73, R74, R75, R76|9K1||Resistor|||0603|12
+R72|0||Resistor|||0603|1
+R85, R86, R87, R89, R91, R93, R95, R97, R99, R101, R103, R105, R107, R109, R111, R113, R123, R147, R148, R187, R189, R191, R193|1K||Resistor|||0603|23
+R88, R90, R92, R94, R96, R98, R100, R102, R104, R106, R108, R110, R112, R114, R188, R190, R192, R194|5K6||Resistor 1206|||1206|18
+R115, R116, R117, R118|49.9/1%||Resistor|||0603|4
+R120|4.99K/1%||Resistor|||0603|1
+R121|1.5K/1%||Resistor|||0603|1
+R124, R125, R126, R127|220||Resistor|||0603|4
+R128, R160|330||Resistor|||0603|2
+R129|100K||Resistor|||0603|1
+R131, R132|680||Resistor|||0603|2
+R133, R149, R150, R151, R152, R154, R155, R156, R157, R158, R159|33K||Resistor|||0603|11
+R136, R161|3K3||Resistor|||0603|2
+R162|2K||Resistor|||0603|1
+S1||Omron|Switch|B3FS-1002||SPST-2|1
+T1, T2, T3, T4, T5, T6||NXP|NPN, BCX55-16|BCX55-16|1081279|SOT89|6
+U1, U4, U7, U10, U27, U28||Maxim|QUAD SPST Analog Switch|MAX4533CAP+|1379970|SSOP20|6
+U2||Microchip|2.7V 8-Channel 12-Bit A/D Converters with SPI|MCP3208-CI/SL|1084270|SOIC16|1
+U3, U12||Microchip|4.096V Voltage Reference|MCP1541(T)-I/TT|1084310|SOT23|2
+U5, U6||Microchip|Rail-to-Rail Input/Output, 10 MHz Op Amps|MCP6024-I/SL|129247|SOIC16|2
+U8, U9, U11||Microchip|12-Bit DAC with SPI Interface|MCP4922(T)-E/ST||TSSOP14|3
+U13, U15, U17, U19, U21, U23||National Semiconductors|Low Power Dual Operational Amplifiers|LM358A||SO8|6
+U14, U16, U18, U20, U22, U24||Maxim|DUAL SPST ANALOG_SWITCHES, MAX4700CAE|MAX4700CAE||TSSOP16|6
+U25||Microchip|High Speed Can Transceiver|MCP2551||SOIC150-8_N|1
+U26||Infineon|Smart Power High-Side-Switch Eight Channels|ITS4880R|1440818|PowerSO36|1
+U29, U30, U31, U32, U33, U34, U35, U36, U37, U38, U39, U40, U41, U42, U54, U55, U56, U57||Agilent|DC Input Phototransistor Optocoupler SMD Mini-Flat|HCPL-181-000E||SO8_special|18
+U43||Micrel|Transceiver PHY Layer 3.3V|KSZ8721BL|1517240|LQFP-48_L|1
+U44||NXP|ARM7 16/32-Bit Microcontroller, 512KB Flash, 58KB RAM, 4 Channel CAN, 144-Lead LQFP|LPC 2378 144||SOT486-1_N|1
+U45||Microchip|512 Kbit Serial SPI bus EEPROM with high speed clock|25LC512-I/SN|1556153|SOIC8|1
+U46||Texas Instruments|Octal dual supply translating transceiver; 3-state|SN74LVC4245ADBR|1470927|TSSOP24|1
+U47||National Semiconductors|High Efficiency 5A Step-Down Volttage Regulator|LM2678S-5.0|1469215|TS7B|1
+U48||National Semiconductors|5A Low Dropout Fast Response Regulators|LMS1585AIS-3.3||TO-263|1
+U49||National Semiconductor|ADJ Voltage Regulator|LM317AEMP|9779272|SOT223|1
+U50||Microchip|Voltage Supervisory Circuit|MCP120T-475I/TT||SOT23|1
+U51||ST|3 to 5.5V, Low power, up to 400Kbps RS-232 Drivers|ST3232CTR||TSSOP16|1
+U52, U53||Texas Instruments|3.3-V RS-485 TRANSCEIVERS|SN75HVD12D(G4)|1470461|SOIC8|2

Tester/SW/Eclipse/Applications/groupings/ledfunctions.h

@@ -65,6 +65,7 @@
  */
 void LEDPauseFlash(t_led_ids LEDnum, UINT8 counts, INT16 delay_length);
 
+
 /* ---------------------------------------------------------------------------
  * Function: LEDResult
  * 
@@ -77,6 +78,7 @@ void LEDPauseFlash(t_led_ids LEDnum, UINT8 counts, INT16 delay_length);
  */
 void LEDResult (BOOLEAN TestResult);
 
+
 /* ---------------------------------------------------------------------------
  * Function: LEDResultDIO
  * 
@@ -90,6 +92,7 @@ void LEDResult (BOOLEAN TestResult);
  */
 void LEDResultDIO (BOOLEAN TestResult, UINT16 dioNo);
 
+
 /* ---------------------------------------------------------------------------
  * Function: LEDToggleForever
  * 
@@ -102,6 +105,7 @@ void LEDResultDIO (BOOLEAN TestResult, UINT16 dioNo);
  */
 void LEDToggleForever( void);
 
+
 /* ---------------------------------------------------------------------------
  * Function: LEDToggle
  * 
@@ -114,6 +118,7 @@ void LEDToggleForever( void);
  */
 void LEDToggle( UINT16 cnts);
 
+
 /* ---------------------------------------------------------------------------
  * Function: LEDShowStatus
  * 
@@ -126,6 +131,7 @@ void LEDToggle( UINT16 cnts);
  */
 void LEDShowStatus (UINT16 status);
 
+
 /* ---------------------------------------------------------------------------
  * Functions: gLEDToggle / rLEDToggle
  * 
@@ -140,6 +146,7 @@ void LEDShowStatus (UINT16 status);
 void gLEDToggle (UINT16 time);
 void rLEDToggle (UINT16 time);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dioToggle
  * 
@@ -153,6 +160,7 @@ void rLEDToggle (UINT16 time);
  */
 void dioToggle (UINT16 LEDnr);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dioToggleNC
  * 
@@ -166,6 +174,7 @@ void dioToggle (UINT16 LEDnr);
  */
 void dioToggleNC (UINT16 LEDnr);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dio2x4
  * 
@@ -180,6 +189,7 @@ void dioToggleNC (UINT16 LEDnr);
  */
 void dio2x4 (UINT32 ToggleTime);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dioClean
  * 
@@ -192,6 +202,7 @@ void dio2x4 (UINT32 ToggleTime);
  */
 void dioClean (void);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dioCapture
  * 
@@ -204,6 +215,7 @@ void dioClean (void);
  */
 UINT8 dioCapture (void);
 
+
 /* ---------------------------------------------------------------------------
  * Function: dioResume
  * 

Tester/SW/Eclipse/Applications/groupings/protocolfunctions.c

@@ -1,5 +1,5 @@
 /* ---------------------------------------------------------------------------
- * protocolfunctions.c - v0.1                           (c) 2008 Micro-key bv
+ * protocolfunctions.c                                  (c) 2008 Micro-key bv
  * ---------------------------------------------------------------------------
  * Micro-key bv
  * Industrieweg 28, 9804 TG Noordhorn
@@ -54,8 +54,6 @@
  * Global variable definitions
  * ---------------------------------------------------------------------------
  */
-
-
 extern BOOLEAN auto_testResult;
 extern UINT32 UINT32result;
 /* ---------------------------------------------------------------------------

Tester/SW/Eclipse/Applications/groupings/protocolfunctions.h

@@ -157,6 +157,18 @@ void slaveRestartFunction (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 void UINT32ResultFunction (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
 
+/* ---------------------------------------------------------------------------
+ * Function: receiveRemoteAttachedFunctions
+ * 
+ * Function to receive and print the name of a attached remote function
+ * 
+ * Parameters:  UINT8 requestNr  - number of the request
+ *              UINT8 nrOfResult - Number of Attached Results
+ *              UIN32 *results   - Attached Results 
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void receiveRemoteAttachedFunctions (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
 #endif /* __PROTOCOLTEST_H__ */

Tester/SW/Eclipse/Applications/main.c

@@ -37,7 +37,7 @@
 /* ---------------------------------------------------------------------------
  * Description: MAIN File to Application Project
  * ---------------------------------------------------------------------------
- * Version(s):  0.1, Jul 07, 2008, MMi
+ * Version(s):  0.1, Jul 08, 2008, MMi
  *                 
  * ---------------------------------------------------------------------------
  */

Tester/SW/Eclipse/Applications/menu/menu.c

@@ -96,7 +96,7 @@ void CallMenu(void)
     UINT8 buffer;
     BOOLEAN receive;
     
-    char separator[] = " ";
+    char separator[] = " ";                 /* Seperator list for strtok()  */
     char *commandt;
     char *pcmd;
     char *arg1t;
@@ -126,6 +126,7 @@ void CallMenu(void)
         
         do                              /* do-while loop for String input   */
             {
+            /* Read from serial port input buffer                           */
             if ((receive = serGet(MenuPort, &buffer) == TRUE))
                 {
                 if (buffer == '\t')

Tester/SW/Eclipse/Applications/menu/menuargs.c

@@ -111,7 +111,7 @@ const char *command_table[NUMBER_OF_COMMANDS] =
         "volout"
 };
 
-/* Make Sure that at least the first letter of this is in alphabetical order*/
+
 const fpointer command_pointer[NUMBER_OF_COMMANDS] = 
 {
         m_aio,

Tester/SW/Eclipse/Applications/menu/menuargs.h

@@ -38,7 +38,7 @@
  * Type definitions.
  * ---------------------------------------------------------------------------
  */
-typedef void (*fpointer)(void);
+typedef void (*fpointer)(void);             /* Function pointer for menu    */
 /* ---------------------------------------------------------------------------
  * Variable declarations.
  * ---------------------------------------------------------------------------
@@ -49,6 +49,16 @@ typedef void (*fpointer)(void);
  * ---------------------------------------------------------------------------
  */
 
+/* ---------------------------------------------------------------------------
+ * Function: menuInit
+ * 
+ * Initialises the menu structure and calculates the offset table
+ * 
+ * Parameters:  void
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void menuInit (void);
 
 #endif /*MENUARGS_H_*/

Tester/SW/Eclipse/Applications/menu/menufunctions.c

@@ -10,7 +10,7 @@
  * Email: support@microkey.nl  
  * Web: www.microkey.nl
  * ---------------------------------------------------------------------------
- * Description: 
+ * Description: All called, menu-specific functions are defined here 
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, Nov 14, 2008, MMi
  *                   Creation.
@@ -118,7 +118,7 @@ void m_run(void)
 {
     dioClean();
     diotasksdelete();
-    // \MARK Automatic Test not necessary on Olimex Board
+// \MARK Automatic Test not necessary on Olimex Board
 #if ((PINSET_TESTER == 1) || (PINSET_TESTER == 2)) 
 //    automaticdesigntest();                  // \TODO NO AUTOMATIC TEST AVAILABLE
 #else
@@ -329,7 +329,8 @@ void m_curout(void)
             sendString(MenuPort, TRUE, importantMessage, "Wrote Output to: ",
                     ItoDStr(dacReadBack(arg1, arg2)), " uA");
             }
-        } else
+        } 
+    else
         {
         sendString(MenuPort, TRUE, importantMessage,
                 "ARGUMENT ERROR! Did nothing... ", Dummy, Dummy);

Tester/SW/Eclipse/Applications/remote/remote_analogue.h

@@ -64,20 +64,123 @@ xSemaphoreHandle remoteAnalogueSemaphore;
  * ---------------------------------------------------------------------------
  */
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAioInit
+ * 
+ * Initialisation of the remote analogue driver; takes the analogue semaphore
+ * 
+ * Parameter: void
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteAioInit (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAioWrite
+ * 
+ * Writes to one remote analogue output
+ * 
+ * Parameter:   UINT8 device    - Number of the device to write one
+                UINT8 channel   - Channelnumber that should be affected
+                INT32 value     - Value that should be written
+ * 
+ * Return: RESULT - Write result
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteAioWrite (UINT8 device, UINT8 channel, INT32 value);
 
+/* ---------------------------------------------------------------------------
+ * Function: remoteAioWriteAll
+ * 
+ * Writes to all remote analogue outputs
+ * 
+ * Parameter:   UINT8 device                - Number of the device to write on 
+                t_boardtype_analogue board  - type of board (MB or EB)
+                INT32 value                 - Value that should be written
+ * 
+ * Return: RESULT - Write result
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteAioWriteAll (UINT8 device, t_boardtype_analogue board, BOOLEAN value);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAioread
+ * 
+ * Reads on one remote analogue outputs
+ * 
+ * Parameter:   UINT8 device   - Number of the device to write on 
+                UINT8 channel  - Number of affected channel
+ * 
+ * Return: UINT32 - Read value
+ * ---------------------------------------------------------------------------
+ */
 UINT32 remoteAioRead (UINT8 device, UINT8 channel);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAioread
+ * 
+ * Reads on one remote analogue outputs
+ * 
+ * Parameter:   UINT8 device                - Number of the device to write on 
+                t_boardtype_analogue board  - type of board (MB or EB)
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteAioReadAll (UINT8 device, t_boardtype_analogue board);
 
+
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueSemaphoreRelease
+ * 
+ * Is called as a result from the remote device to release the analogue 
+ * Semaphore. This call is the last statement within the remote procedure.
+ * It assures that the complete function is executed before the local 
+ * software resumes working.
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteAnalogueSemaphoreRelease (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: analogueReadResult
+ * 
+ * Is called as result function; receives the remotely read value
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void analogueReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: analogueReadAllResult
+ * 
+ * Is called as result function; receives the remotely read values
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void analogueReadAllResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
 

Tester/SW/Eclipse/Applications/remote/remote_digital.c

@@ -49,6 +49,7 @@
  * ---------------------------------------------------------------------------
  */
 BOOLEAN remoteDigitalInitialised = FALSE;
+
 /* ---------------------------------------------------------------------------
  * Local variable definitions
  * ---------------------------------------------------------------------------
@@ -72,6 +73,8 @@ void remoteDioInit (void)
             NewLine, "Initialise digital remote buffers", Dummy);
     sendString (SerOutPort, FALSE, importantMessage,
             "\tInputs...", Dummy, Dummy);
+    
+    /* reset stat array of remote digital inputs                            */
     for (loopcnt = 0; loopcnt < NUMBER_OF_TOTAL_DI; loopcnt++)
         {
         remoteDigitalInputs[loopcnt] = FALSE;
@@ -81,6 +84,8 @@ void remoteDioInit (void)
     
     sendString (SerOutPort, FALSE, importantMessage,
             "\tOutputs...", Dummy, Dummy);    
+    
+    /* Reset stat array of remote digital outputs                           */
     for (loopcnt = 0; loopcnt < NUMBER_OF_TOTAL_DO; loopcnt++)
         {
         remoteDigitalOutputs[loopcnt] = FALSE;
@@ -88,10 +93,11 @@ void remoteDioInit (void)
     sendString (SerOutPort, FALSE, importantMessage,
             "Done", Dummy, Dummy);
     
-    
+    /* Create and afterwards take the remote_digital semaphore              */
     vSemaphoreCreateBinary (remoteDigitalSemaphore);
     sendString (SerOutPort, TRUE, importantMessage,
             "Take digital semaphore... ", Dummy, Dummy);  
+    /* Print out if semaphore-taking was successful                         */
     if (xSemaphoreTake(remoteDigitalSemaphore, 0) == pdTRUE)
         {
         sendString (SerOutPort, FALSE, importantMessage,
@@ -103,12 +109,13 @@ void remoteDioInit (void)
                 "Failed", Dummy, Dummy);
         }
     
-    
+    /* Set all mainboard and extensionboard outputs to LOW                  */
     sendString(SerOutPort, TRUE, importantMessage,
             "reset remote digital outputs...", Dummy, Dummy);
     set_mb = remoteDioWriteAll (remoteDeviceNumber, digital_mb, FALSE);
     set_eb = remoteDioWriteAll (remoteDeviceNumber, digital_eb, FALSE);
     
+    /* Print out if setting of remote outputs was successful                */
     if ((set_mb == OK) && (set_eb == OK))
         {
         sendString(SerOutPort, FALSE, importantMessage, "Done", Dummy, Dummy);
@@ -131,27 +138,32 @@ RESULT remoteDioWrite (UINT8 device, UINT8 channel, BOOLEAN value)
         /* Remote digital driver is not initialised                         */
         sendString (SerOutPort, TRUE, importantMessage,
                 "\t\tdigital not intialised", Dummy, Dummy);
-        return (ERROR);
+        return (ERROR);                     /* Return error result          */
         }
     
+    /* Copy channelnumber and value to array that will be sent              */
     sendArray[0] = (INT32) channel;
     sendArray[1] = (INT32) value;
     
+    /* Call DigitalWrite on remote device                                   */
     bpSendCallRpc(handleBus1, device, 20, 2, sendArray);
     
+    /* Take digital Semaphore with predefined timeout                       */
     if (xSemaphoreTake(remoteDigitalSemaphore, 3000) != pdTRUE)
-            {
-            sendString (SerOutPort, TRUE, importantMessage,
-                    s_tab, "digital write was not successful", Dummy);
+        {
+        /* Semaphore was able to be taken, return error result              */
+        sendString (SerOutPort, TRUE, importantMessage,
+                s_tab, "digital write was not successful", Dummy);
         
-            returnValue = ERROR;
-            }
-        else
-            {
-            remoteDigitalOutputs[channel] = value;
+        returnValue = ERROR;
+        }
+    else
+        {
+        /* Semaphore was taken successfully, return OK result               */
+        remoteDigitalOutputs[channel] = value;
         
-            returnValue = OK;
-            }
+        returnValue = OK;
+        }
     
     return (returnValue);
 }
@@ -165,6 +177,7 @@ RESULT remoteDioWriteAll(UINT8 device, t_boardtype_digital board, BOOLEAN value)
     
     RESULT returnValue;
     
+
     if (remoteDigitalInitialised == FALSE)
         {
         /* Remote digital driver is not initialised                         */
@@ -173,13 +186,17 @@ RESULT remoteDioWriteAll(UINT8 device, t_boardtype_digital board, BOOLEAN value)
         return (ERROR);
         }
 
+    /* Copy boardtype and value to array that will be sent                  */
     sendArray[0] = (INT32)board;
     sendArray[1] = (INT32)value;
 
+    /* Call DigitalWriteAll on remote device                                */
     bpSendCallRpc(handleBus1, device, 21, 2, sendArray);
 
+    /* Take digital Semaphore with predefined timeout                       */
     if (xSemaphoreTake(remoteDigitalSemaphore, 3000) != pdTRUE)
         {
+        /* Semaphore was able to be taken, return error result              */
         sendString(SerOutPort, TRUE, importantMessage, s_tab,
                 "digital write was not successful", Dummy);
         
@@ -187,30 +204,34 @@ RESULT remoteDioWriteAll(UINT8 device, t_boardtype_digital board, BOOLEAN value)
         } 
     else
         {
-
+        /* Semaphore was taken successfully                                 */
+        /* Switch depending on the board type                               */
         switch (board)
             {
             case digital_mb:
+                /* Set loop values for mainboard                            */
                 loopcnt = 0;
                 loopend = NUMBER_OF_DO_MB;
                 break;
 
             case digital_eb:
+                /* Set loop values for extensionboard                       */
                 loopcnt = NUMBER_OF_DO_MB;
                 loopend = NUMBER_OF_TOTAL_DO;
                 break;
             }
 
+        /* Write all values in local stat array to given value in a loop    */
         for (loopcnt; loopcnt < loopend; loopcnt++)
             {
             remoteDigitalOutputs[loopcnt] = value;
             // \TODO IS THIS LOOP WORKING??
             }
         
-        returnValue = OK;
+        returnValue = OK;                   /* Set result to OK             */
         }
     
-    return (returnValue);
+    return (returnValue);                   /* Return result                */
 }
 
 
@@ -229,19 +250,27 @@ BOOLEAN remoteDioRead (UINT8 device, INT32 channel)
     return (ERROR);
     }
 
-
+    /* Call DigitalRead on remote device                                    */
     bpSendCallRpc(handleBus1, device, 22, 1, channelArray);
+    
+    /* Take digital Semaphore with predefined timeout                       */
     if (xSemaphoreTake(remoteDigitalSemaphore, 3000) != pdTRUE)
         {
+        /* Semaphore was able to be takenprint out error message            */
         sendString (SerOutPort, TRUE, importantMessage,
                 s_tab, "digital read did not receive a readback", Dummy);
         }
     else
         {
+        /* The actual value is received in the resultfunction 
+         * "digitalReadResult" (see below in this file). This function 
+         * handles the received value to the global variable 
+         * "remoteDioReadresult", which is read below
+         */
         remoteDigitalInputs[channel] = remoteDioReadResult;
         }
 
-    return (remoteDioReadResult);
+    return (remoteDioReadResult);           /* Return result                */
 }
 
 
@@ -259,9 +288,13 @@ void remoteDioReadAll (UINT8 device, t_boardtype_digital board)
         return;
         }
 
+    /* Call DigitalReadAll on remote device                                 */
     bpSendCallRpc(handleBus1, device, 23, 1, boardArray);
+    
+    /* Take digital Semaphore with predefined timeout                       */
     if (xSemaphoreTake(remoteDigitalSemaphore, 3000) != pdTRUE)
         {
+        /* Semaphore was able to be takenprint out error message            */
         sendString (SerOutPort, TRUE, importantMessage,
                 s_tab, "digital read all did not receive a readback", Dummy);
         }
@@ -276,18 +309,18 @@ void remoteDioReadAll (UINT8 device, t_boardtype_digital board)
 
 void remoteDigitalSemaphoreRelease (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
 {
-
     if (remoteDigitalInitialised == FALSE)
         {
-        /* Remote digital driver is not initialised                         */
+        /* Remote digital driver is not initialised, semaphore unaccessible */
         sendString (SerOutPort, TRUE, importantMessage,
                 "\t\tdigital not intialised", Dummy, Dummy);
-        return;
+        return;                             /* Return without action        */
         }
 
-    xSemaphoreGive (remoteDigitalSemaphore);
+    xSemaphoreGive (remoteDigitalSemaphore); /* Release digital Semaphore   */
 }
 
+
 void digitalReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
 {
 
@@ -296,7 +329,7 @@ void digitalReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
         /* Remote digital driver is not initialised                         */
         sendString (SerOutPort, TRUE, importantMessage,
                 "\t\tdigital not intialised", Dummy, Dummy);
-        return;
+        return;                             /* Return without action        */
         }
 
     /* nrOfResults = 2
@@ -312,7 +345,7 @@ void digitalReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
         /* Remote digital input is HIGH                                     */
         remoteDioReadResult = TRUE;
         }    
-    xSemaphoreGive (remoteDigitalSemaphore);
+    xSemaphoreGive (remoteDigitalSemaphore); /* Release digital Semaphore   */
 }
 
 
@@ -342,13 +375,16 @@ void digitalReadAllResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
         /* Incoming Results are from Mainboard                              */
         for (loopcnt = 0; loopcnt < NUMBER_OF_DI_MB; loopcnt++)
             {
+            /* Write incoming result to channel bit                         */
             tempValue = (results[1] & (0x0000 | (1 << loopcnt)));
             if (tempValue == 0)
                 {
+                /* Received result is a LOW value - write to stat array     */
                 remoteDigitalInputs[loopcnt] = FALSE;
                 }
             else
                 {
+                /* Received result is a HIGH value - write to stat array    */
                 remoteDigitalInputs[loopcnt] = TRUE;
                 }
             }
@@ -359,18 +395,21 @@ void digitalReadAllResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results)
         /* Incoming Results are from Extensionboard                         */
         for (loopcnt = 0; loopcnt < NUMBER_OF_DI_EB; loopcnt++)
             {
+            /* Write incoming result to channel bit                         */
             tempValue = (results[1] & (0x0000 | (1 << loopcnt)));
             
             if (tempValue == 0)
                 {
+                /* Received result is a LOW value - write to stat array     */
                 remoteDigitalInputs[(loopcnt + NUMBER_OF_DI_MB)] = FALSE;
                 }
             else
                 {
+                /* Received result is a HIGH value - write to stat array    */
                 remoteDigitalInputs[(loopcnt + NUMBER_OF_DI_MB)] = TRUE;
                 }
             }
         }
     
-    xSemaphoreGive (remoteDigitalSemaphore);
+    xSemaphoreGive (remoteDigitalSemaphore); /* Release digital Semaphore   */
 }

Tester/SW/Eclipse/Applications/remote/remote_digital.h

@@ -55,32 +55,137 @@ typedef enum
  * Variable declarations.
  * ---------------------------------------------------------------------------
  */
-
-
 BOOLEAN remoteDigitalInputs[(NUMBER_OF_TOTAL_DI)];
 BOOLEAN remoteDigitalOutputs[(NUMBER_OF_TOTAL_DO)];
 
-xSemaphoreHandle remoteDigitalSemaphore;
+xSemaphoreHandle remoteDigitalSemaphore;   /* Prototype of digital Semaphore*/
 
 /* ---------------------------------------------------------------------------
  * Function declarations.
  * ---------------------------------------------------------------------------
  */
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDioInit
+ * 
+ * Initialisation of the digital remote driver, creates and takes digital
+ * Semaphore.
+ * 
+ * Parameters: void
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteDioInit (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDioWrite
+ * 
+ * Sets or cleans a digital output on the remote device
+ * 
+ * Parameters:  UINT8 device    - Number of the remote device
+ *              UINT8 channel   - Number of the effected remote channel
+ *              BOOLEAN value   - Value to be written
+ * 
+ * Return: RESULT - Indicates the status of the write action
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteDioWrite (UINT8 device, UINT8 channel, BOOLEAN value);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDioWriteAll
+ * 
+ * Sets or cleans all digital outputs of a kind on the remote device
+ * 
+ * Parameters:  UINT8 device                - Number of the remote device
+ *              t_boardtype_digital board   - Type of board (MB or EB)
+ *              BOOLEAN value               - Value to be written
+ * 
+ * Return: RESULT - Indicates the status of the write action
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteDioWriteAll (UINT8 device, t_boardtype_digital board, BOOLEAN value);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDioRead
+ * 
+ * reads from one remote digital input. If the result fails, the previous 
+ * generated result will be returned.
+ * 
+ * Parameters:  UINT8 device    - Number of the remote device
+ *              UINT8 channel   - Number of the effected remote channel
+ * 
+ * Return: BOOLEAN - The read result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDioRead (UINT8 device, INT32 channel);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDioReadAll
+ * 
+ * reads from all remote digital inputs. If the result fails, nothing happens
+ * 
+ * Parameters:  UINT8 device                - Number of the remote device
+ *              t_boardtype_digital board   - Type of board (MB or EB)
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteDioReadAll (UINT8 device, t_boardtype_digital board);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalSemaphoreRelease
+ * 
+ * Is called as a result from the remote device to release the digital 
+ * Semaphore. This call is the last statement within the remote procedure.
+ * It assures that the complete function is executed before the local 
+ * software resumes working.
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteDigitalSemaphoreRelease (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: digitalReadResult
+ * 
+ * Is called as a result from the remote device to transfer the read value. 
+ * digitalReadResult stores the received value to a global variable.
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void digitalReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: digitalReadAllResult
+ * 
+ * Is called as a result from the remote device to transfer the read value. 
+ * digitalReadResult stores the received value to a global array. 
+ * 
+ * Parameters:  UINT8 requestNr     - Number of the momentary request
+ *              UINT8 nrOfResults   - Indicates how many values are returned
+ *              UINT32 *results     - Result-Array of "NrOfResults"-size
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void digitalReadAllResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
 #endif /*DIGITAL_TEST_H_*/

Tester/SW/Eclipse/Applications/remote/remote_misc.c

@@ -85,6 +85,7 @@ BOOLEAN makeHandshake (void)
 }
 #endif
 
+
 UINT8 returnRemoteCalibrationStatus (INT32 correctionType)
 {
     xSemaphoreTake(generalSemaphore, 0);

Tester/SW/Eclipse/Applications/remote/remote_misc.h

@@ -16,13 +16,14 @@
  *                   Creation.
  * ---------------------------------------------------------------------------
  */
-#include "lpc23xx.h"
-#include "types.h" 
+#ifndef REMOTE_MISC_H_
+#define REMOTE_MISC_H_
 /* ---------------------------------------------------------------------------
  * System include files.
  * ---------------------------------------------------------------------------
  */
-
+#include "lpc23xx.h"
+#include "types.h" 
 /* ---------------------------------------------------------------------------
  * Application include files.
  * ---------------------------------------------------------------------------
@@ -67,7 +68,5 @@ UINT8 showRemoteCalibrationStatus (INT32 correctionType);
 
 void digitalReadResult (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);
 
-#ifndef REMOTE_MISC_H_
-#define REMOTE_MISC_H_
 
 #endif /*REMOTE_MISC_H_*/

Tester/SW/Eclipse/Applications/remote/remote_relay.h

@@ -59,12 +59,63 @@ xSemaphoreHandle remoteRelaySemaphore;
  * ---------------------------------------------------------------------------
  */
  
+ 
+/* ---------------------------------------------------------------------------
+ * Function: remoteRelayInit
+ * 
+ * Initialisation of the relay remote driver, creates and takes relay
+ * Semaphore.
+ * 
+ * Parameters: void
+ * 
+ * Return: void
+ * ---------------------------------------------------------------------------
+ */
 void remoteRelayInit(void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteRelaySet
+ * 
+ * Sets or cleans a relay output on the remote device
+ * 
+ * Parameters:  UINT8 device    - Number of the remote device
+ *              UINT8 channel   - Number of the effected remote channel
+ *              BOOLEAN value   - Value to be written
+ * 
+ * Return: RESULT - Indicates the status of the write action
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteRelaySet (UINT8 device, UINT8 channel, BOOLEAN value);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteRelayRead
+ * 
+ * reads from one remote relay input. If the result fails, the previous 
+ * generated result will be returned.
+ * 
+ * Parameters:  UINT8 device    - Number of the remote device
+ *              UINT8 channel   - Number of the effected remote channel
+ * 
+ * Return: BOOLEAN - The read result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteRelayRead (UINT8 device, UINT8 channel);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteRelaySetAll
+ * 
+ * Sets or cleans all relay outputs on the remote device
+ * 
+ * Parameters:  UINT8 device    - Number of the remote device
+ *              UINT8 channel   - Number of the effected remote channel
+ *              BOOLEAN value   - Value to be written
+ * 
+ * Return: RESULT - Indicates the status of the write action
+ * ---------------------------------------------------------------------------
+ */
 RESULT remoteRelaySetAll (UINT8 device, t_boardtype_relay board, BOOLEAN value);
 
 void remoteRelaySemaphoreRelease (UINT8 requestNr, UINT8 nrOfResults, UINT32 *results);

Tester/SW/Eclipse/Applications/remote/test_analogue.c

@@ -80,11 +80,11 @@ BOOLEAN remoteAnalogueLinetestMBExecute (void)
     
     remoteAnalogueOutput = remoteAnalogueOutputTest_MB();
     sendString (SerOutPort, TRUE, resultMessage,
-            "remote analogue output test: ", f_tab, BoolRestoStr(remoteAnalogueOutput));
+            "remote analogue output: ", f_tab, BoolRestoStr(remoteAnalogueOutput));
     
     remoteAnalogueInput = remoteAnalogueInputTest_MB();
     sendString (SerOutPort, TRUE, resultMessage,
-            "remote analogue input test: ", f_tab, BoolRestoStr(remoteAnalogueInput));
+            "remote analogue input: ", f_tab, BoolRestoStr(remoteAnalogueInput));
     
     if ((remoteAnalogueOutput == TRUE) && (remoteAnalogueInput == TRUE))
         {
@@ -95,6 +95,9 @@ BOOLEAN remoteAnalogueLinetestMBExecute (void)
         returnValue = FALSE;
         }
     
+    sendString (SerOutPort, TRUE, resultMessage,
+            "remote analogue test: ", f_tab, BoolRestoStr(remoteAnalogueInput));
+    
     return (returnValue);
     
 }

Tester/SW/Eclipse/Applications/remote/test_analogue.h

@@ -53,16 +53,81 @@
  * ---------------------------------------------------------------------------
  */
 
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueLinetestMBExecute
+ * 
+ * Main function to the analogue connectivity test of the main board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueLinetestMBExecute (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueLinetestEBExecute
+ * 
+ * Main function to the analogue connectivity test of the extension board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueLinetestEBExecute (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueOutputTest_MB
+ * 
+ * Analogue output test for test_item main board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueOutputTest_MB (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueInputTest_MB
+ * 
+ * Analogue input test for test_item main board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueInputTest_MB (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueOutputTest_EB
+ * 
+ * Analogue output test for test_item extension board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueOutputTest_EB (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteAnalogueInputTest_EB
+ * 
+ * Analogue input test for test_item extension board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteAnalogueInputTest_EB (void);
 
 

Tester/SW/Eclipse/Applications/remote/test_digital.c

@@ -69,23 +69,32 @@ BOOLEAN remoteDigitalLinetestMBExecute (void)
     BOOLEAN remoteDigitalOutput;
     BOOLEAN remoteDigitalInput;
     
-    
+    /* Call mainboard digital output test and print out result afterwards   */
     remoteDigitalOutput = remoteDigitalOutputTest_MB();
     sendString (SerOutPort, TRUE, resultMessage,
-            "remote digital_mb output test: ", f_tab, BoolRestoStr(remoteDigitalOutput));
+            "remote digital_mb output: ", f_tab, BoolRestoStr(remoteDigitalOutput));
+    
+    /* Call mainboard digital input test and print out result afterwards    */
     remoteDigitalInput = remoteDigitalInputTest_MB();
     sendString (SerOutPort, TRUE, resultMessage,
-            "remote digital_mb input test: ", f_tab, BoolRestoStr(remoteDigitalInput));
+            "remote digital_mb input: ", f_tab, BoolRestoStr(remoteDigitalInput));
     
+    
+    /* Calculate test result                                                */
     if ((remoteDigitalOutput == TRUE) && (remoteDigitalInput == TRUE))
         {
+        /* Test is passed                                                   */
         returnValue = TRUE;
         }
     else
         {
+        /* Test is passed                                                   */
         returnValue = FALSE;
         }
     
+    sendString (SerOutPort, TRUE, resultMessage,
+            "remote digital_mb test: ", f_tab, BoolRestoStr(remoteDigitalInput));
+    
     return (returnValue);
 }
 
@@ -93,29 +102,38 @@ BOOLEAN remoteDigitalLinetestEBExecute (void)
 {
 // \MARK NEW PINSETTINGS FOR TESTER (2)
 #if (PINSET_TESTER == 2)
+/* Extensionboard Test is available only on the specified test device       */
+
     BOOLEAN returnValue;
     BOOLEAN remoteDigitalOutput;
     BOOLEAN remoteDigitalInput;      
    
+    /* Call extensionboard digital output test and print result afterwards  */
     remoteDigitalOutput = remoteDigitalOutputTest_EB();
     sendString (SerOutPort, TRUE, resultMessage,
             "remote digital_eb output test: ", f_tab, BoolRestoStr(remoteDigitalOutput));
     
+    /* Call extensionboard digital input test and print result afterwards   */
     remoteDigitalInput = remoteDigitalInputTest_EB();
     sendString (SerOutPort, TRUE, resultMessage,
             "remote digital_eb input test: ", f_tab, BoolRestoStr(remoteDigitalInput));
     
+    /* Calculate test result                                                */
     if ((remoteDigitalOutput == TRUE) && (remoteDigitalInput == TRUE))
         {
+        /* Test is passed                                                   */
         returnValue = TRUE;
         }
     else
         {
+        /* Test is failed                                                   */
         returnValue = FALSE;
         }
     
     return (returnValue);
+
 #else
+/* If other board than specific tester, printf out "test unavailable" text  */
     sendString (SerOutPort, TRUE, importantMessage,
             "Extension Board test not available on this device", Dummy, Dummy);
     
@@ -136,11 +154,13 @@ BOOLEAN remoteDigitalOutputTest_MB (void)
     
     /* Reset all remote digital outputs to LOW/OFF                          */
     remoteDioWriteAll(remoteDeviceNumber, digital_mb, FALSE);
-    vTaskDelay (200);
+    vTaskDelay (500);                       /* Wait for reset remote outputs*/
     
+    /* Test each channel individually within a loop
+     * Loop-condition is the number of digital outputs on the test item
+     */
     for (channelcnt = 0; channelcnt < NUMBER_OF_DO_MB; channelcnt++)
         {    
-        
         /* Read remote digital channel value for LOW test                   */
         if (dioRead(thisDeviceNumber, channelcnt) == FALSE)
             {
@@ -192,11 +212,12 @@ BOOLEAN remoteDigitalOutputTest_MB (void)
                 }
             }
         
+        /* Re-set remote digital output to LOW                              */
         remoteDioWrite(remoteDeviceNumber, channelcnt, FALSE);
         
         /* Message out Test Results                                         */
         sendString (SerOutPort, TRUE, testMessage,
-                "\tLinetest for Digital Input ", ItoDStr(channelcnt), ": ");
+                "\tLinetest for Digital Output (MB) ", ItoDStr(channelcnt), ": ");
         sendString (SerOutPort, FALSE, testMessage,
                 "  ", Dummy, BoolRestoStr (Low_Test));
         sendString (SerOutPort, FALSE, testMessage,
@@ -205,13 +226,16 @@ BOOLEAN remoteDigitalOutputTest_MB (void)
                 "  ", Dummy, BoolRestoStr (High_Test));
         vTaskDelay (50);
         
+        /* If one of the individual tests fails, calculate a negative
+         * over-all test result
+         */
         if ((Low_Test == FALSE) || (High_Test == FALSE) || (AllOther_Test == FALSE))
             {
             returnResult = FALSE;
             }
         }
     
-    return (returnResult);
+    return (returnResult);                  /* Return test result to caller */
 }
 
 BOOLEAN remoteDigitalInputTest_MB (void)
@@ -225,8 +249,11 @@ BOOLEAN remoteDigitalInputTest_MB (void)
     BOOLEAN AllOther_Test = TRUE;
     
     dioClean();                             /* Clean local digital outputs  */
-    vTaskDelay (500);
+    vTaskDelay (500);                       /* Wait for local outputs       */
     
+    /* Test each channel individually within a loop
+     * Loop-condition is the number of digital inputs on the test item
+     */
     for (channelcnt = 0; channelcnt < NUMBER_OF_DI_MB; channelcnt++)
         {
         if (remoteDioRead(remoteDeviceNumber, channelcnt) == FALSE)
@@ -240,20 +267,19 @@ BOOLEAN remoteDigitalInputTest_MB (void)
             Low_Test = FALSE;
             }
 
-        vTaskDelay (200);
+        /* Write local output to HIGH state                                 */
         dioWrite(thisDeviceNumber, channelcnt, TRUE);   
-        vTaskDelay(200);
+        vTaskDelay(200);                    /* Wait for local output        */
         
         if (remoteDioRead(remoteDeviceNumber, channelcnt) == TRUE)
             {
             /* Read back a HIGH Value, which is correct - HIGH test passed  */
-            vTaskDelay(500);
             High_Test = TRUE;
             }
         else
             {
             /* read back a LOW Value, which is incorrect - HIGH test failed */
-            vTaskDelay(500);
+
             High_Test = FALSE;
             }
         
@@ -286,7 +312,7 @@ BOOLEAN remoteDigitalInputTest_MB (void)
 
         /* Message out Test Results                                         */
         sendString (SerOutPort, TRUE, testMessage,
-                "\tLinetest for Digital Input ", ItoDStr(channelcnt), ": ");
+                "\tLinetest for Digital Input (MB) ", ItoDStr(channelcnt), ": ");
         sendString (SerOutPort, FALSE, testMessage,
                 "  ", Dummy, BoolRestoStr (Low_Test));
         sendString (SerOutPort, FALSE, testMessage,
@@ -295,13 +321,16 @@ BOOLEAN remoteDigitalInputTest_MB (void)
                 "  ", Dummy, BoolRestoStr (High_Test));
         vTaskDelay (50);
         
+        /* If one of the individual tests fails, calculate a negative
+         * over-all test result
+         */
         if ((Low_Test == FALSE) || (High_Test == FALSE) || (AllOther_Test == FALSE))
             {
             returnResult = FALSE;
             }
         }
     
-    return (returnResult);
+    return (returnResult);                  /* Return test result           */
 }
 
 
@@ -317,6 +346,7 @@ BOOLEAN remoteDigitalOutputTest_EB (void)
     
 // \MARK NEW PINSETTINGS FOR TESTER (2)
 #if (PINSET_TESTER == 2)
+/* Necessary due to compiling on alternative boards                         */
     dio_inMuxEn (TRUE);                     /* Switch dio to Extension Board*/
 #endif
     
@@ -324,6 +354,14 @@ BOOLEAN remoteDigitalOutputTest_EB (void)
     remoteDioWriteAll(remoteDeviceNumber, digital_eb, FALSE);
     vTaskDelay (200);
     
+    /* Test each channel individually within a loop
+     * Loop-condition is the total number of digital outputs on the test item
+     * The remote digital write/read function counts up to 12 (8 MB + 4 EB),
+     * the local write/read only to 8. The 4 extension board connections 
+     * must be switche manually. That is why the loop counting starts with
+     * the number of the mainboard outputs, which represents the first
+     * extensionboard output.
+     */
     for (channelcnt = NUMBER_OF_DO_MB; channelcnt < NUMBER_OF_TOTAL_DO; channelcnt++)
         {
         if (dioRead(thisDeviceNumber, (channelcnt - NUMBER_OF_DO_MB)) == FALSE)
@@ -376,7 +414,7 @@ BOOLEAN remoteDigitalOutputTest_EB (void)
             }
         /* Message out Test Results                                         */
         sendString (SerOutPort, TRUE, testMessage,
-                "\tLinetest for Digital Input ", ItoDStr(channelcnt), ": ");
+                "\tLinetest for Digital Ouput(EB) ", ItoDStr(channelcnt), ": ");
         sendString (SerOutPort, FALSE, testMessage,
                 "  ", Dummy, BoolRestoStr (Low_Test));
         sendString (SerOutPort, FALSE, testMessage,
@@ -385,6 +423,9 @@ BOOLEAN remoteDigitalOutputTest_EB (void)
                 "  ", Dummy, BoolRestoStr (High_Test));
         vTaskDelay (50);
         
+        /* If one of the individual tests fails, calculate a negative
+         * over-all test result
+         */
         if ((Low_Test == FALSE) || (High_Test == FALSE) || (AllOther_Test == FALSE))
             {
             returnResult = FALSE;
@@ -393,10 +434,11 @@ BOOLEAN remoteDigitalOutputTest_EB (void)
     
 // \MARK NEW PINSETTINGS FOR TESTER (2)
 #if (PINSET_TESTER == 2)
+/* Necessary due to compiling on alternative boards                         */
     dio_inMuxEn (FALSE);                    /* Switch dio back to main Board*/
 #endif
     
-    return (returnResult);
+    return (returnResult);                  /* Return test result           */
 }
 
 
@@ -412,12 +454,21 @@ BOOLEAN remoteDigitalInputTest_EB (void)
     
 // \MARK NEW PINSETTINGS FOR TESTER (2)
 #if (PINSET_TESTER == 2)
+/* Necessary due to compiling on alternative boards                         */
     dio_outMuxEn (TRUE);                     /* Switch dio to Extension Board*/
 #endif
     
     dioClean();                             /* Clean local digital outputs  */
-    vTaskDelay (500);
+    vTaskDelay (500);                       /* assure that cleaning is done */
     
+    /* Test each channel individually within a loop
+     * Loop-condition is the number of digital inputs available on the
+     * extension board. The remote digital write/read function counts up 
+     * to 12 (8 MB + 4 EB), the local write/read only to 8. The 4 extension 
+     * board connections must be switched manually (first 4 local inputs).
+     * This is why the remote channel number is added with the number of
+     * the digital inputs available on the mainboard. 
+     */
     for (channelcnt = 0; channelcnt < NUMBER_OF_DI_EB; channelcnt++)
         {
         if (remoteDioRead(remoteDeviceNumber, (channelcnt + NUMBER_OF_DI_MB)) == FALSE)
@@ -431,8 +482,9 @@ BOOLEAN remoteDigitalInputTest_EB (void)
             Low_Test = FALSE;
             }
         
-        vTaskDelay (200);
+        /* Set local digital output to HIGH stat                            */
         dioWrite(thisDeviceNumber, channelcnt, TRUE);
+        vTaskDelay(200);                    /* Wait for command is finished */
         
         if (remoteDioRead(remoteDeviceNumber, (channelcnt + NUMBER_OF_DI_MB)) == TRUE)
             {
@@ -445,8 +497,9 @@ BOOLEAN remoteDigitalInputTest_EB (void)
             High_Test = FALSE;
             }
         
+        /* Read all remote digital inputs                                   */
         remoteDioReadAll(remoteDeviceNumber, digital_eb);
-        vTaskDelay (200);
+        vTaskDelay (200);                   /* Wait for command is finished */
         
         for (loopcnt = 0; loopcnt < NUMBER_OF_DI_EB; loopcnt++)
             {
@@ -474,7 +527,7 @@ BOOLEAN remoteDigitalInputTest_EB (void)
 
         /* Message out Test Results                                         */
         sendString (SerOutPort, TRUE, testMessage,
-                "\tLinetest for Digital Input ", ItoDStr(channelcnt), ": ");
+                "\tLinetest for Digital Input (EB) ", ItoDStr(channelcnt), ": ");
         sendString (SerOutPort, FALSE, testMessage,
                 "  ", Dummy, BoolRestoStr (Low_Test));
         sendString (SerOutPort, FALSE, testMessage,
@@ -483,6 +536,9 @@ BOOLEAN remoteDigitalInputTest_EB (void)
                 "  ", Dummy, BoolRestoStr (High_Test));
         vTaskDelay (50);
         
+        /* If one of the individual tests fails, calculate a negative
+         * over-all test result
+         */
         if ((Low_Test == FALSE) || (High_Test == FALSE) || (AllOther_Test == FALSE))
             {
             returnResult = FALSE;
@@ -491,9 +547,10 @@ BOOLEAN remoteDigitalInputTest_EB (void)
     
 // \MARK NEW PINSETTINGS FOR TESTER (2)
 #if (PINSET_TESTER == 2)
+/* Necessary due to compiling on alternative boards                         */
     dio_outMuxEn (FALSE);                   /* Switch dio back to main Board*/
 #endif
     
-    return (returnResult);
+    return (returnResult);                  /* Return test result           */
 }
 

Tester/SW/Eclipse/Applications/remote/test_digital.h

@@ -52,10 +52,81 @@
  * Function declarations.
  * ---------------------------------------------------------------------------
  */
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalLinetestMBExecute
+ * 
+ * Main function to the remote mainboard digital in-/output test
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDigitalLinetestMBExecute (void);
+
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalLinetestEBExecute
+ * 
+ * Main function to the remote extensionboard digital in-/output test
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDigitalLinetestEBExecute (void);
 
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalOutputTest_MB
+ * 
+ * Function to the remote mainboard digital outputs
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDigitalOutputTest_MB (void);
+
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalInputTest_MB
+ * 
+ * Function to the remote mainboard digital inputs
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDigitalInputTest_MB (void);
+
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalOutputTest_EB
+ * 
+ * Function to the remote extensionboard digital outputs
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteDigitalOutputTest_EB (void);
+
+
+/* ---------------------------------------------------------------------------
+ * Function: remoteDigitalInputTest_EB
+ * 
+ * Function to the remote extensionboard digital inputs
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - Test result
+ * ---------------------------------------------------------------------------
+ */
+BOOLEAN remoteDigitalInputTest_EB (void);
 #endif /*TEST_DIGITAL_H_*/

Tester/SW/Eclipse/Applications/remote/test_leds.h

@@ -50,6 +50,16 @@
  * ---------------------------------------------------------------------------
  */
 
+/* ---------------------------------------------------------------------------
+ * Function: remoteLEDTestMBexecute
+ * 
+ * LED test for all LEDS available on CPU and main board
+ * 
+ * Parameter: void
+ * 
+ * Return: BOOLEAN - test result
+ * ---------------------------------------------------------------------------
+ */
 BOOLEAN remoteLEDTestMBexecute (void);
 
 

Tester/SW/Eclipse/lib/Drivers/SerOut.c

@@ -15,7 +15,7 @@
  * Contains some handy Functions to convert different DataTypes to Strings
  *  
  * ---------------------------------------------------------------------------
- * Version(s):  0.1, Feb 11, 2008, MMi
+ * Version(s):  0.1, Apr 11, 2008, MMi
  *                   Creation.
  * ---------------------------------------------------------------------------
  */

Tester/SW/Eclipse/lib/Drivers/SerOut.h

@@ -13,7 +13,7 @@
  * Description: 
  * Headerfile for SerOut.c
  * ---------------------------------------------------------------------------
- * Version(s):  0.1, Feb 11, 2008, MMi
+ * Version(s):  0.1, Apr 11, 2008, MMi
  *                   Creation.
  * ---------------------------------------------------------------------------
  */

Tester/SW/Eclipse/lib/Drivers/adc.c

@@ -14,6 +14,8 @@
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, 28-11-2007, fvds.
  *                   Creation.
+ *              
+ *              Calibration updates by MMi
  * ---------------------------------------------------------------------------
  */
 

Tester/SW/Eclipse/lib/Drivers/adc.h

@@ -14,6 +14,8 @@
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, 10-09-2007, Marcel Mulder.
  *                   Creation.
+ *
+ *              Calibration updates by MMi
  * ---------------------------------------------------------------------------
  */
 #ifndef __ADC_H__

Tester/SW/Eclipse/lib/Drivers/can.c

@@ -12,7 +12,7 @@
  * ---------------------------------------------------------------------------
  * Description: 
  * ---------------------------------------------------------------------------
- * Version(s):  0.1, Feb 11, 2008, MMi
+ * Version(s):  0.1, Dez 11, 2008, MMi
  *                   Creation.
  * ---------------------------------------------------------------------------
  */

Tester/SW/Eclipse/lib/Drivers/can.h

@@ -12,7 +12,7 @@
  * ---------------------------------------------------------------------------
  * Description: 
  * ---------------------------------------------------------------------------
- * Version(s):  0.1, Feb 11, 2008, MMi
+ * Version(s):  0.1, Dez 11, 2008, MMi
  *                   Creation.
  * ---------------------------------------------------------------------------
  */

Tester/SW/Eclipse/lib/Drivers/dac.c

@@ -14,6 +14,8 @@
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, 28-11-2007, fvds.
  *                   Creation.
+ *
+ *              Calibration updates by MMi
  * ---------------------------------------------------------------------------
  */
 

Tester/SW/Eclipse/lib/Drivers/dac.h

@@ -14,6 +14,8 @@
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, 10-09-2007, Marcel Mulder.
  *                   Creation.
+ *
+ *              Calibration updates by MMi
  * ---------------------------------------------------------------------------
  */
 #ifndef __DAC_H__

Tester/SW/Eclipse/lib/Drivers/dio.c

@@ -390,7 +390,8 @@ BOOLEAN dioRead(UINT8 device, /**< 0 = Self, 1..32 = Remote device */
         if (*gpioRegister & inputPins[channel].pinMask)
             {
             Result = FALSE;
-            } else
+            } 
+        else
             {
             Result = TRUE;
             }
@@ -456,7 +457,8 @@ BOOLEAN data)
                     + CLR_OFFSET);
             *gpioRegister = outputPins[channel].pinMask;
             }
-        } else
+        } 
+    else
         {
         bpecWriteDioValue(device, channel, data);
         }

Tester/SW/Eclipse/lib/Drivers/rtc.c

@@ -14,6 +14,8 @@
  * ---------------------------------------------------------------------------
  * Version(s):  0.1, 28-11-2007, fvds.
  *                   Creation.
+ *
+ *              Updates by MMi
  * ---------------------------------------------------------------------------
  */
 

Tester/SW/designtest_control/QUA_2475_designtest/Master.cs

@@ -40,6 +40,18 @@ namespace QUA_2475_designtest
 {
     public partial class mainWindow
     {
+        private void remoteRTCset()
+        {
+            string sendString;
+
+            sendString = String.Format("setrtc 2 {0} {1}\r", DateTime.Now.ToString("MMddHHmm"), DateTime.Now.ToString("yyyy"));
+            com1.Write(sendString);
+        }
+
+        private void calibrateAnalogue()
+        {
+            com1.Write("cslave 4\r");
+        }
 
 
         private void T_MasterInput_TextChanged(object sender, EventArgs e)
@@ -81,25 +93,38 @@ namespace QUA_2475_designtest
             else
             {
                 /* Calling Function is in same Thread                       */
+                try
+                {
+                    /* Search for Text fragments in Input String                */
+                    if (text.LastIndexOf("PASSED") != -1)
+                    {
+                        /* "PASSED" indecates that Device successfully 
+                         * finished a Test Script or Routine 
+                         */
+                        activeTest = false;
+                        TestResult[actualTest] = true;
+                        TestIsPassed(actualTest);
+                    }
+                    if (text.LastIndexOf("FAILED") != -1)
+                    {
+                        /* "FAILED" indecates that Device finished
+                         * a Test Script or Routine with Errors 
+                         */
+                        activeTest = false;
+                        TestResult[actualTest] = false;
+                        TestIsFailed(actualTest);
+                    }
+                    if (text.LastIndexOf("CALIBRATION PART FINISHED") != -1)
+                    {
+                        activeTest = false;
+                        TestResult[actualTest] = true;
+                        CalibrationFinished();
+                    }
 
-                /* Search for Text fragments in Input String                */
-                if (text.LastIndexOf("test: 	PASSED") != -1)
-                {
-                    /* "test: 	PASSED" indecates that Device successfully 
-                     * finished a Test Script or Routine 
-                     */
-                    activeTest = false;
-                    TestResult[actualTest] = true;
-                    TestIsPassed(actualTest);
                 }
-                if (text.LastIndexOf("test: 	 FAILED") != -1)
+                catch
                 {
-                    /* "test: 	 FAILED" indecates that Device finished
-                     * a Test Script or Routine with Errors 
-                     */
                     activeTest = false;
-                    TestResult[actualTest] = false;
-                    TestIsFailed(actualTest);
                 }
             }
         }
@@ -160,9 +185,9 @@ namespace QUA_2475_designtest
                          * corresponding Test and send the String afterwards
                          * to CehckForKeyword to find specific Keyword
                          */
-                        CheckForSlaveKeyword(new string(buffer));
-                        //TestMessage[actualTest] += new string(buffer);
-                        //CheckForSlaveKeyword(TestMessage[actualTest]);
+//                        CheckForSlaveKeyword(new string(buffer));
+                        TestMessage[actualTest] += new string(buffer);
+                        CheckForSlaveKeyword(TestMessage[actualTest]);
                     }
                     nrOfBytes = com1.BytesToRead;   /* Actualise Inputlength*/
                 }

Tester/SW/designtest_control/QUA_2475_designtest/initialisation.cs

@@ -50,7 +50,7 @@ namespace QUA_2475_designtest
         Thread TestTimeoutThread;       /* Test Timeout Thread              */
 
         /* INTEGER DEFINITION */
-        const int NrOfTests = 15;       /* Indicates number of single Test  */
+        const int NrOfTests = 23;       /* Indicates number of single Test  */
         uint actualTest = 0;            /* Indicates number of actual Test  */
         uint TotalTestNumber = 1;       /* Number of total Tests            */
         uint TotalPassedNumber = 1;     /* Number of passed Tests           */
@@ -61,6 +61,10 @@ namespace QUA_2475_designtest
         private bool Master_receiveMessages = true;  /* Allow COM2 to read  */
         private bool activeTest = false;    /* Indicates an active Test     */
         private bool activeAutomatictest = false; /* autoTest is active     */
+        private bool AllTestResult;         /* Shows the autoTest Result    */
+        private bool setRTC = false;
+
+
 
         /* ARRAY DEFINITION */
         /* Array of all available Textboxes for Tests                       */
@@ -71,6 +75,10 @@ namespace QUA_2475_designtest
         public string[] Testfiles = new string[NrOfTests];
         /* Array to contain each Test Result                                */
         public bool[] TestResult = new bool[NrOfTests];
+        /* Array to enable individual tests                                 */
+        public bool[] ActivateTest = new bool[NrOfTests];
+        /* Array for all test messages of single Test                       */
+        public string[] TestMessage = new String[NrOfTests];
 
         private string MasterInputString;   /* bound to T_MasterInput       */
 
@@ -81,45 +89,58 @@ namespace QUA_2475_designtest
          */
         public enum TestType
         {
-            MB_LED = 0,
-            MB_EEPROM = 1,
-            ETH1 = 2,
-            ETH0 = 3,
-            CF = 4,
-            USB = 5,
-            MB_DIO = 6,
-            MB_AIO = 7,
-            MB_RLY = 8,
-            CAN = 9,
-            EB_LED = 10,
-            EB_EEPROM = 11,
-            EB_DIO = 12,
-            EB_AIO = 13,
-            EB_RLY = 14
+            VCC         = 0,
+            VDDAT       = 1,
+            VBAT        = 2,
+            VCORE       = 3,
+            TEMP        = 4,
+            REVNUM      = 5,
+            LED_MB      = 6,
+            EEPROM_MB   = 7,
+            ETH0        = 8,
+            ETH1        = 9,
+            USB         = 10,
+            DIO_MB      = 11,
+            AIO_MB      = 12,
+            RLY_MB      = 13,
+            LED_EB      = 14,
+            EEPROM_EB   = 15,
+            DIO_EB      = 16,
+            AIO_EB      = 17,
+            RLY_EB      = 18,
+            CAL_AOMB    = 19,
+            CAL_AIMB    = 20,
+            CAL_AOEB    = 21,
+            CAL_AIEB    = 22
         };
 
         public void initialise()
         {
-            com1.PortName = "COM1";                 /* Bind com1 to COM1    */
+            com1.PortName = "COM9";                 /* Bind com1 to COM1    */
             com1.Open();                            /* Open com1            */
             com1.BaudRate = 115200;                 /* Set com1 Baudrate    */
 
             /* Capture corresponding Textboxes to TextBox Array             */
-            TestTextBoxes[(int)TestType.MB_LED]     = T_test_MB_LED;
-            TestTextBoxes[(int)TestType.MB_EEPROM]  = T_test_MB_EEPROM;
-            TestTextBoxes[(int)TestType.ETH1]       = T_test_eth1;
+            TestTextBoxes[(int)TestType.VCC]        = T_test_VCC;
+            TestTextBoxes[(int)TestType.VDDAT]      = T_test_VDDAT;
+            TestTextBoxes[(int)TestType.VBAT]       = T_test_VBAT;
+            TestTextBoxes[(int)TestType.VCORE]      = T_test_VCORE;
+            TestTextBoxes[(int)TestType.TEMP]       = T_test_TEMP;
+            TestTextBoxes[(int)TestType.REVNUM]     = T_test_REVNUM;
+            TestTextBoxes[(int)TestType.LED_MB]     = T_test_MB_LED;
+            TestTextBoxes[(int)TestType.EEPROM_MB]  = T_test_MB_EEPROM;
             TestTextBoxes[(int)TestType.ETH0]       = T_test_eth0;
-            TestTextBoxes[(int)TestType.CF]         = T_test_CF;
+            TestTextBoxes[(int)TestType.ETH1]       = T_test_eth1;
             TestTextBoxes[(int)TestType.USB]        = T_test_USB;
-            TestTextBoxes[(int)TestType.MB_DIO]     = T_test_MB_DIO;
-            TestTextBoxes[(int)TestType.MB_AIO]     = T_test_MB_AIO;
-            TestTextBoxes[(int)TestType.MB_RLY]     = T_test_MB_RLY;
-            TestTextBoxes[(int)TestType.CAN]        = T_test_CAN;
-            TestTextBoxes[(int)TestType.EB_LED]     = T_test_EB_LED;
-            TestTextBoxes[(int)TestType.EB_EEPROM]  = T_test_EB_EEPROM;
-            TestTextBoxes[(int)TestType.EB_DIO]     = T_test_EB_DIO;
-            TestTextBoxes[(int)TestType.EB_AIO]     = T_test_EB_AIO;
-            TestTextBoxes[(int)TestType.EB_RLY]     = T_test_EB_RLY;
+            TestTextBoxes[(int)TestType.DIO_MB]     = T_test_MB_DIO;
+            TestTextBoxes[(int)TestType.AIO_MB]     = T_test_MB_AIO;
+            TestTextBoxes[(int)TestType.RLY_MB]     = T_test_MB_RLY;
+            TestTextBoxes[(int)TestType.LED_EB]     = T_test_EB_LED;
+            TestTextBoxes[(int)TestType.EEPROM_EB]  = T_test_EB_EEPROM;
+            TestTextBoxes[(int)TestType.DIO_EB]     = T_test_EB_DIO;
+            TestTextBoxes[(int)TestType.AIO_EB]     = T_test_EB_AIO;
+            TestTextBoxes[(int)TestType.RLY_EB]     = T_test_EB_RLY;
+
 
             /* Reset all Test Results                                       */
             TestResult[0] = false;
@@ -137,28 +158,48 @@ namespace QUA_2475_designtest
             TestResult[12] = false;
             TestResult[13] = false;
             TestResult[14] = false;
+            TestResult[15] = false;
+            TestResult[16] = false;
+            TestResult[17] = false;
+            TestResult[18] = false;
+            TestResult[19] = false;
+            TestResult[20] = false;
+            TestResult[21] = false;
+            TestResult[22] = false;
+
 
             /* Define Commands (path and filename) for test-script calls    */
-            TestCallCommands[0] = "ledtest 2\r";
-            TestCallCommands[1] = "eeprom 2\r";
-            TestCallCommands[2] = "\r";
-            TestCallCommands[3] = "\r";
-            TestCallCommands[4] = "\r";
-            TestCallCommands[5] = "\r";
-            TestCallCommands[6] = "dio 2\r";
-            TestCallCommands[7] = "\r";
-            TestCallCommands[8] = "\r";
-            TestCallCommands[9] = "\r";
-            TestCallCommands[10] = "\r";
-            TestCallCommands[11] = "\r";
-            TestCallCommands[12] = "\r";
-            TestCallCommands[13] = "\r";
-            TestCallCommands[14] = "\r";
+            TestCallCommands[0] = "test_vcc 2\r";
+            TestCallCommands[1] = "test_vddat 2\r";
+            TestCallCommands[2] = "test_vbat 2\r";
+            TestCallCommands[3] = "test_vcore 2\r";
+            TestCallCommands[4] = "test_temp 2\r";
+            TestCallCommands[5] = "test_revnum 2\r";
+            TestCallCommands[6] = "test_led 2 0\r";
+            TestCallCommands[7] = "test_eeprom 2 0\r";
+            TestCallCommands[8] = "test_eth 2 0\r";
+            TestCallCommands[9] = "test_eth 2 1\r";
+            TestCallCommands[10] = "test_usb 2\r";
+            TestCallCommands[11] = "test_dio 2 0\r";
+            TestCallCommands[12] = "test_aio 2 0\r";
+            TestCallCommands[13] = "test_rly 2 0\r";
+            TestCallCommands[14] = "test_led 2 1\r";
+            TestCallCommands[15] = "test_eeprom 2 1\r";
+            TestCallCommands[16] = "test_dio 2 1\r";
+            TestCallCommands[17] = "test_aio 2 1\r";
+            TestCallCommands[18] = "test_rly 2 1\r";
+            TestCallCommands[19] = "cslave 0\r";
+            TestCallCommands[20] = "cslave 1\r";
+            TestCallCommands[21] = "cslave 2\r";
+            TestCallCommands[22] = "cslave 3\r";
+
 
 
             /* Define and start com1 reading Thread                         */
             com1GetMessage = new Thread(new ThreadStart(com1_DataReceived));
             com1GetMessage.Start();
+
+
         }
     }
 }